RAVENOL DOT 5.1

RAVENOL DOT 5.1 1 L- 1350602-001
ART.-NR. 1350602-001
  • 1 L | 1350602-001
Specifications
ISO 4925 Class 5-1
FMVSS 116 DOT 5.1
SAE J1704
Categories
Brake fluid

RAVENOL DOT 5.1 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.

Because of the special formulation of RAVENOL DOT 5.1 the international specifications SAE J1704, ISO 4925 and the safety regulations FMVSS 116 DOT 5.1 from the United States of America are exceeded.

Application Notes

RAVENOL DOT 5.1 can be used in all vehicles for which the DOT 5.1 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.

RAVENOL DOT 5.1 is miscible with all known brake fluids of the same specification.

Characteristics

RAVENOL DOT 5.1  offers:

  • optimum ABS characteristics
  • chemical stability
  • best lubrication efficiency
  • neutral behaviour against brake parts
  • low viscosity at low temperatures
  • miscible with all brake fluids of the same specification

RAVENOL Brake Fluid 

PropertyUnitDataAudit
Colourhellgelbvisual
Density at 20°Ckg/m³1069EN ISO 12185
Boiling point°C269SAE J1704
wet boiling point°C187SAE J1704
Viscosity at -40°CmPa*s810SAE J1704
kinematic viscosity at 100°Cmm²/s2,16ASTM D445
pH-Wert7,49FMVSS 116
High Temperature Stability°C0FMVSS 116
Chemical Stability°C1,5FMVSS 116
Evaporation lossGew%68FMVSS 116
Fluidity & Appearance at -40°Ci.O., 2sFMVSS 116
Fluidity & Appearance at -50°Ci.O., 4sFMVSS 116
Water Tolerance at -40°Cklar, 2sFMVSS 116
Water Tolerance at +60°Cklar, keine AblagerungenFMVSS 116
Compatibility at -40°Cklar, keine PhasentrennungFMVSS 116
Compatibility at +60°Cklar, keine AblagerungenFMVSS 116
Water contentGew.-%0,1Karl Fischer
Corrosion Resistance
Tinned IronΔ mg/cm²-0,01FMVSS 116
_Aussehengut
SteelΔ mg/cm²-0,004FMVSS 116
_Aussehengut
AluminiumΔ mg/cm²-0,02FMVSS 116
_Aussehengut
Cast IronΔ mg/cm²-0,01FMVSS 116
_Aussehengut
BrassΔ mg/cm²-0,05FMVSS 116
_Aussehengut
CopperΔ mg/cm²-0,03FMVSS 116
_Aussehengut
ZincΔ mg/cm²0,03FMVSS 116
_Aussehengut
Aussehen der Flüssigkeiti.O.FMVSS 116
Ablagerungen%<0,05FMVSS 116
pH-Wert7,33FMVSS 116
Veränderung des Durchmessers von Gummi0,03FMVSS 116
Veränderung der HärteIRHD-6FMVSS 116
Erscheinungsbildi.O.FMVSS 116
Tinned IronΔ mg/cm²-0,01FMVSS 116
_Aussehengut
AluminiumΔ mg/cm²-0,01FMVSS 116
_Aussehengut
Beständigkeit gegen Gummi
SBR bei 70°CØ Veränderung, mm0,44FMVSS 116
__Härte, IRHD-6FMVSS 116
___Volumen, %4,31FMVSS 116
_Aussehengut
SBR bei 120°CØ Veränderung, mm0,72FMVSS 116
__Härte, IRHD-11FMVSS 116
___Volumen, %8,47FMVSS 116
_Aussehengut
EPDM bei 70°C (Anforderung aus SAE J1703)Härte, IRHD-2FMVSS 116
___Volumen, %0,74FMVSS 116
_Aussehengut
EPDM bei 120°CHärte, IRHD-3FMVSS 116
___Volumen, %1,73FMVSS 116
_Aussehengut
Naturell bei 70°C (Anforderung aus ISO 4925)Ø Veränderung, mm0,2FMVSS 116
__Härte, IRHD-6FMVSS 116
___Volumen, %3,62FMVSS 116
_Aussehengut
Newsletter