RAVENOL RRS SAE 5W-50
- 1 L | 1142100-001
- 4 L | 1142100-004
- 5 L | 1142100-005
- 10 L | 1142100-010
- 20 L | 1142100-020
- 20 L | 1142100-B20
- 60 L | 1142100-060
- 60 L | 1142100-D60
- 208 L | 1142100-208
- 208 L | 1142100-D28
- 1000 L | 1142100-700
- Fully synthetic
- Rallye- / Racing oils USVO®
RAVENOL RRS SAE 5W-50 is a modern, PAO (poly-alpha-olefin) based fully synthetic multigrade engine oil with USVO® Technology for gasoline engines.
RAVENOL RRS SAE 5W-50 is ideally suited for car racing, even when subject to the highest levels of strain.
The USVO® technology offers high performance, improved engine protection, reduced fuel consumption and optimized engine cleanliness for your vehicle. Due to its high viscosity index, the associated very high shear stability and a highly effective special novel additive with tungsten, RAVENOL RRS SAE 5W-50 is suitable for an extremely sporty driving style.
RAVENOL RRS SAE 5W-50 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency.
RAVENOL RRS SAE 5W-50 achieves a secure lubrication layer thanks to its unique formulation even at very high operating temperatures, protection from corrosion (oxidation) and foaming.
RAVENOL RRS SAE 5W-50 can be used as special oil for car racings even under most difficult conditions.
RAVENOL RRS SAE 5W-50 offers:
- Ultra-modern fully synthetic engine oil for car race with special tungsten additivation
- Safe lubricating layer at very high operating temperatures
- High HTHS value, very good shear stability
- Very stable and excellent viscosity behaviour
- Very low evaporation tendency
- Very good cold start characteristics
- Very good detergent and dispersant characteristics
- Good protection against corrosion and foam formation
|Density at 20°C||kg/m³||849,0||EN ISO 12185|
|Viscosity at 100°C||mm²/s||17,7||DIN 51 562|
|Viscosity at 40°C||mm²/s||111, 7||DIN 51 562|
|Viscosity index VI||175||DIN ISO 2909|
|HTHS at 150°C||mPа*s||4,53||ASTM D5481|
|CCS Viscosity at -30°C||mPa*s||5386||ASTM D5293|
|Low Temp. Pumping viscosity -35°C (MRV)||mPa*s||22.900||ASTM D4684|
|Pourpoint||°C||- 54||DIN ISO 3016|
|Noack Volatility||% M/M||7,5||ASTM D5800/b|
|Flash point||°C||243||DIN ISO 2592|
|TBN||mg KOH/g||10,2||ASTM D2896|
|Sulphated ash||%wt.||1,28||DIN 51 575|