RAVENOL TSi SAE 10W-40
- Viscosity
- 10W-40
- Specifications
- ACEA A3
- ACEA B4
- API SN
- API SM
- API CF
- Fabrication
- Semi-synthetic
- Approvals
- VW 501 01
- MB-Freigabe 229.1
- VW 505 00
- BMW Special Oil
- License: API SN, API SM
- Categories
- Motor oils for passenger cars CleanSynto®
- Recommendations
- VW 502 00/ 500 00
- MB 229.3
RAVENOL TSi SAE 10W-40 is a high additive treated engine oil which allows an energy-saving operation because of its additivation, choice of base oils and viscosity adjustment. In order to guarantee the low viscosity of the SAE class 10W as well as a low evaporation loss RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils and polyalphaolefins (PAO) which correspond to the high tech demands. RAVENOL TSi SAE 10W-40 contains less than 30 % Polyalphaolefins (PAO).
Application Notes
RAVENOL TSi SAE 10W-40 is suitable for all modern cars with petrol and diesel engines all the year; no sludge in the motor, excellent results during the test run. High engine cleanness is guaranteed also in case of turbo charging and a complete catalyst operation as well as multi valves and diesel direct injections.
Characteristics
RAVENOL TSi SAE 10W-40 offers:
- High abrasion resistance
- Fuel saving because of easy running characteristics
- Excellent detergent and dispersant characteristic
- Prevention of black sludge creation
- Long endurance because of high oxidation stability
- Excellent cold start performance
- Very good viscosity temperature behaviour
- Low evaporation
- Suitable for catalysts
Property | Unit | Data | Audit |
---|---|---|---|
Density at 20°C | kg/m³ | 862 | EN ISO 12185 |
Colour | gelbbraun | visual | |
Viscosity at 100°C | mm²/s | 13,9 | DIN 51 562 |
Viscosity at 40°C | mm²/s | 93,2 | DIN 51 562 |
Viscosity index VI | 151 | DIN ISO 2909 | |
HTHS at 150°C | mPа*s | 4,03 | ASTM D5481 |
CCS Viscosity at -25°C | mPa*s | 6300 | ASTM D5293 |
Low Temp. Pumping viscosity (MRV) at -30°C | mPa*s | 24.600 | ASTM D4684 |
Pourpoint | °C | - 36 | DIN ISO 3016 |
Noack Volatility | % M/M | 8,2 | ASTM D5800 |
Flash point (COC) | °C | 238 | DIN ISO 2592 |
TBN | mg KOH/g | 10,0 | ASTM D2896 |
Sulphated ash | %wt. | 1,3 | DIN 51 575 |