RAVENOL VDL SAE 5W-40
- 1 L | 1111132-001
- 4 L | 1111132-004
- 5 L | 1111132-005
- 10 L | 1111132-010
- 20 L | 1111132-020
- 20 L | 1111132-B20
- 60 L | 1111132-060
- 60 L | 1111132-D60
- 208 L | 1111132-208
- 208 L | 1111132-D28
- 1000 L | 1111132-700
- API CF
- ACEA B3
- ACEA B4
- Fully synthetic
- Motor oils for passenger cars CleanSynto®
- VW 505 00
- BMW Longlife-98
- MB 229.3
- Opel GM-LL-B-025
- TOYOTA Common Rail
RAVENOL VDL SAE 5W-40 is a fully synthetic, low-friction engine oil with CleanSynto® Technology for passenger car diesel engines with or without turbo-charging and direct injection.
RAVENOL VDL SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL VDL SAE 5W-40 contributes to protect the environment by reducing the emissions.
RAVENOL VDL SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
VDL SAE 5W-40is
ideally suited for energy-saving year-round use in passenger car diesel engines
with turbocharger and catalytic converter operation.
SAE 5W-40 guarantees operational safety in all driving conditions, such as extreme
stop-and-go traffic as well as high-speed highway driving.
RAVENOL VDL SAE 5W-40 offers:
- High abrasion resistance
- Fuel economy by low friction property
- Excellent detergent and dispersant property
- Prevention of black sludge formation
- Extended endurance because of oxidation stability
- Excellent cold start characteristics
- Excellent viscosity-temperature- characteristics
- Low evaporation tendency
- Suitable for catalysts
|Density at 20°C||kg/m³||849,0||EN ISO 12185|
|Viscosity at 100°C||mm²/s||14,4||DIN 51 562|
|Viscosity at 40°C||mm²/s||87,7||DIN 51 562|
|Viscosity index VI||170||DIN ISO 2909|
|HTHS at 150°C||mPа*s||4,1||ASTM D5481|
|CCS Viscosity at -30°C||mPa*s||6110||ASTM D5293|
|Low Temp. Pumping viscosity (MRV) at -35°C||mPa*s||25.000||ASTM D4684|
|Pourpoint||°C||-45||DIN ISO 3016|
|Noack Volatility||% M/M||9||ASTM D5800/b|
|Flash point (COC)||°C||240||DIN ISO 2592|
|TBN||mg KOH/g||9,5||ASTM D2896|
|Sulphated ash||%wt.||1,3||DIN 51 575|