RAVENOL Transfer Fluid BW 44

RAVENOL Transfer Fluid BW 44 1 L- 1211147-001
ART.-NR. 1211147-001
  • 1 L | 1211147-001
Fabrication
Fully synthetic
Categories
ATF-Transmission fluids for automatic transmissions - Professional line
Recommendations
Mopar 68089195AA
Chrysler Verteilgetriebe 68214750AC, 68214751AB, 68214751AC für Chrysler 300C LX, Dodge Charger LX/LD, Dodge Magnum LX
Mopar 68049954AC / 68049954AA
Mercedes Verteilgetriebe A2032800700 für 4Matik S-Klasse W220E-Klasse W211, C-Klasse W203
Mercedes Verteilgetriebe A2112800900
Mercedes Verteilgetriebe A2112801000
Mercedes Verteilgetriebe A2202800700
Mercedes A001 989 23 03
MB 236.13
BorgWarner 44-40 und BW 44-44
BorgWarner BW 44-46 44-47 44-48 und 44-45 bis 2016

RAVENOL Transfer Fluid BW 44 is a PAO (Poly-alpha-olefin) based, fully synthetic transfer fluid with a special additive and inhibition, which ensure the proper functioning of the active transfer case.
RAVENOL Transfer Fluid BW 44 is a fully synthetic gear lubricant for use in electronically controlled active transfer case.

RAVENOL Transfer Fluid BW 44 ensures optimum power transmission.

Application Notes

RAVENOL Transfer Fluid BW 44 was developed for use in for use in Borg-Warner transmission systems BW 44-40 and BW 44-44 from 2016.

RAVENOL Transfer Fluid BW 44 provides a stable viscosity even under the highest loads. It is particularly suitable when a specification according to MB 236.13 is required.

Characteristics

RAVENOL Transfer Fluid BW 44 offers:

  • Very good lubricating ability even at very low temperatures in winter
  • A high, stable viscosity index
  • Very good oxidation stability
  • Protection against wear, corrosion and foam formation
  • Good balanced coefficient of friction
  • Neutral towards sealing materials
  • Neutral behavior by inhibition compared with non-ferrous metals
PropertyUnitDataAudit
Density at 20°Ckg/m³846,0EN ISO 12185
Colourgelbvisual
Viscosity at 100°Cmm²/s7,2DIN 51562-1
Viscosity at 40°Cmm²/s37,2DIN 51562-1
Viscosity index VI162DIN ISO 2909
Brookfield Viskosität bei -40 °CmPa*s7900ASTM D2983
Pourpoint°C-66DIN ISO 3016
Noack Volatility% M/M6,9ASTM D5800
Flash point°C240DIN ISO 2592
VKA Vier Kugel Test (Verschleiß)mm0,34DIN EN ISO 20623
VKA Vier Kugel-Test (Hochdruck)N2200 / 2400DIN EN ISO 20623
KRL KV 40 °Cmm²/s35,84DIN EN ISO 20844
KRL KV 100 °Cmm²/s6,919DIN EN ISO 20844
Foaming Behaviorml
Seq.I bei 24°Cml/ml0/0ASTM D892
Seq. II bei 93,5°Cml/ml0/0ASTM D892
Seq. III bei 24°C nach 93,5°Cml/ml0/0ASTM D892
Cu-Korrosion bei 150°C1aASTM D130
Oil Finder
Newsletter