Product range : Motor oils for passenger cars

RAVENOL Break-In Oil SAE 20W-50

Viscosity: 20W-50; mineral
Specifications: SAE 20W-50
Fabrication: mineral
Categories: Motor oils for passenger cars

RAVENOL Break-In Oil SAE 20W-50 is a mineral feed oil for the start-up filling and breaking-in of repaired or
overhauled engines with special high-pressure additives that can withstand very high pressure.
RAVENOL Break-In Oil SAE 20W-50 dispenses with the use of friction coefficient improving additives (friction
modifier) to considerably shorten the break-in phase for rebuilt and modified engines. The piston rings are
rapidly seated. Due to its high content of 2.5% ZDDP (zinc dithiophosphate) (equivalent to approx. 2,500 ppm zinc), RAVENOL
Break-In Oil SAE 20W-50 is especially recommended for driving classic V8 engines with flat tappets.
RAVENOL Break-In Oil SAE 20W-50 protects the camshaft, lifter and valve train in the running-in phase of the
engine.
RAVENOL Break-In Oil SAE 20W-50 is very well suited for all high-lift and high-speed camshafts and
regulates the first run-in clearance of engine mounts.
RAVENOL Break-In Oil SAE 20W-50 is well suited for racing engines, which have...

RAVENOL Break-In Oil SAE 30

Specifications: SAE 30
Categories: Motor oils for passenger cars

RAVENOL Break-In Oil SAE 30 is mineral break-in oil for start-up filling and the breaking-in of repaired or
overhauled engines. RAVENOL Break-In Oil SAE 30 dispenses with the use of friction coefficient improving additives (friction modifier) to considerably shorten the break-in phase for rebuilt and modified engines. The piston rings are rapidly seated. Due to its high content of 2.5% ZDDP (zinc dithiophosphate) (equivalent to approx. 2,500 ppm zinc), RAVENOL Break-In Oil SAE 30 is especially recommended for driving classic V8 engines with flat tappets.

RAVENOL Formel Extra SAE 20W-50

Viscosity: 20W-50; mineral
Specifications: API SF; API CD; ACEA A2; ACEA B2
Fabrication: mineral
Categories: Motor oils for passenger cars
Recommendations: MIL-L-46152 B; CCMC G4 (gültig bis 31.12.96)

RAVENOL Formel Extra 20W-50 is a mineral multigrade engine oil for passenger car gasoline and diesel engines with and without turbocharging, and is also suitable for commercial vehicle engines. Designed to minimize friction and wear, the formulation ensures year round high lubricity throughout all operating conditions. Extended oil drain capability where recommended by the vehicle manufacturer.

RAVENOL Formel Standard SAE 10W-30

Viscosity: 10W-30; mineral
Specifications: API SF; API CD; ACEA A2
Fabrication: mineral
Categories: Motor oils for passenger cars
Recommendations: CCMC G4 (gültig bis 31.12.96); MB 227.1; MIL-L-46152 B; MIL-L-2104 D

RAVENOL Formel Standard SAE 10W-30 is excellent multigrade engine oil, which is used in car and truck engines. It corresponds to the requirements of modern diesel engines with and without charge. The favorable viscosity range ensures the high all year lubricity by different operating conditions.

RAVENOL Formel Super SAE 15W-40

Viscosity: 15W-40; mineral
Specifications: API SF
Fabrication: mineral
Categories: Motor oils for passenger cars
Recommendations: MIL-L-46152 B; CCMC G4 (gültig bis 31.12.96)

RAVENOL Formel Super 15W-40 is high quality multi-grade engine oil which corresponds to all requirements of modern carburetor and Diesel engines. It can be used in passenger cars as well as trucks. It fulfils the requirements of modern Diesel engines with or without supercharging. The favourable viscosity area ensures a high lubrication capacity all the year under different operation circumstances.

RAVENOL Gasmotorenöl SAE 40

Viscosity: 40; mineral
Fabrication: mineral
Categories: Motor oils for passenger cars

RAVENOL Gasmotorenöl SAE 40 is gas engine oil suitable for the lubrication of four stroke gas engines, when gases are used with lower sulphur contents.

RAVENOL MGS SAE 15W-40

Viscosity: 15W-40; mineral
Specifications: API CF-4; API SJ; ACEA E2; ACEA A3/B4
Fabrication: mineral
Approvals: TEDOM Group 1P
Categories: Motor oils for passenger cars
Recommendations: MB 226.9

RAVENOL MGS SAE 15W-40 is high performance multi-grade engine oil suitable for the lubrication of natural gas engines. It has excellent lubricating film adhesion, very good shear stability and an excellent cleaning power and high resistance to aging.

RAVENOL Super HD 30

Viscosity: 30; mineral
Specifications: API CD; API SF
Fabrication: mineral
Categories: Motor oils for passenger cars

RAVENOL Super HD30 is a mineral mono grade engine oil for passenger car gasoline and diesel engines with and without turbocharging, and is also suitable for commercial vehicle engines and vans under light loads which require this grade of oil. Designed to minimize friction and wear, the formulation ensures year round high lubricity throughout all operating conditions. Extended oil drain capability where recommended by the vehicle manufacturer.

RAVENOL Super HD 50

Viscosity: 50; mineral
Specifications: API SF
Fabrication: mineral
Categories: Motor oils for passenger cars
Recommendations: CCMC G2/D1; MIL-L-46152 B/C; Ford ESE-M2C 153C; Ford SMM-2C 9011A; GM 6085M

RAVENOL Super HD 50 is a mineral mono grade engine oil for passenger car gasoline and diesel engines with and without turbocharging, and is also suitable for commercial vehicle engines and vans under light loads which require this grade of oil. Designed to minimize friction and wear, the formulation ensures year round high lubricity throughout all operating conditions. Extended oil drain capability where recommended by the vehicle manufacturer.

RAVENOL TEG 10W-40

Viscosity: 10W-40; Semi-synthetic
Specifications: API CF
Fabrication: Semi-synthetic
Categories: Motor oils for passenger cars

RAVENOL TEG 10W-40 is high performance semi-synthetic multi-grade engine oil, based on hydrocrack base oils and PAO, suitable for the lubrication of natural gas engines. It has excellent lubricating film adhesion, very good shear stability and an excellent cleaning power and high resistance to aging.

RAVENOL TURBO EXTRA SAE 20W-50

Viscosity: 20W-50; mineral
Specifications: API SL; API CF; API CH-4; ACEA A3; ACEA B4; ACEA E2
Fabrication: mineral
Categories: Motor oils for passenger cars
Recommendations: Deutz DQC II-10; Cummins CES 20071; VW 505 00; Volvo VDS; MB 228.1; MB 229.1; MAN 271; MTU; MACK EO-M

RAVENOL TURBO EXTRA SAE 20W-50 is universal multigrade engine oil for passenger car gasoline and diesel engines with or without turbocharging. Excellent Features by special solvent refined base oils and special additives. Minimizes friction and wear, good cold start properties. Extended oil change intervals according to manufacturer's instructions. The high additive content of RAVENOL TURBO EXTRA SAE 20W-50 guarantees an excellent effect, especially in regard to the detergent, dispersant and anti-wear properties. RAVENOL TURBO EXTRA SAE 20W-50 is a top product with high safety reserves.

RAVENOL Turbo-C HD-C SAE 15W-40

Viscosity: 15W-40; mineral
Specifications: API CF-4; API CF; API SL; ACEA A3; ACEA B4; ACEA E2
Fabrication: mineral
Approvals: MAN M 3275-1; MB-Freigabe 229.1
Categories: Motor oils for passenger cars
Recommendations: MAN 271; ZF TE-ML 07C; VW 505 00; Allison C4; Caterpillar TO-2; Volvo VDS; MACK EO-L; MTU Type 2

RAVENOL Turbo-C HD-C SAE 15W-40 is high quality multi-grade engine oil for passenger cars and trucks with diesel engines with or without turbo charger which has been adapted to the ever-growing demands. It is also suitable for use gasoline (petrol) engines. It has an excellent lubricating film adhesion and very good shear stability and an excellent cleaning power and high resistance to aging.

RAVENOL VEG SAE 5W-40

Viscosity: 5W-40; Fully synthetic
Specifications: ACEA A3; ACEA B4; API SM; API SL; API CF
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars

RAVENOL VEG SAE 5W-40 is high performance fully-synthetic multi-grade engine oil, based on high value fully synthetic base oils and poly alphaolefines (PAO), suitable for the lubrication of natural gas engines. It has excellent lubricating film adhesion, very good shear stability and an excellent cleaning power and high resistance to aging.

RAVENOL ALS SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: ACEA C3
Fabrication: Fully synthetic
Approvals: MB-Approval 229.51; BMW Longlife-04
Categories: Motor oils for passenger cars USVO®
Recommendations: Honda; Nissan; MAZDA; Suzuki; Toyota; Chrysler MS-11106

RAVENOL Arctic Low SAPS ALS SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines of high performance vehicles and vans with Diesel Particular Filter DPF and Three-Way Catalyst, which require HTHS >3,5 mPa*s. RAVENOL Arctic Low SAPS ALS SAE 0W-30 is based on additives which prolong the lifetime of Diesel Particular Filter DPF and Three-Way Catalyst. RAVENOL Arctic Low SAPS ALS SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL Arctic Low SAPS ALS SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL...

RAVENOL DFE SAE 0W-20

Viscosity: 0W-20; Fully synthetic
Specifications: API SN (RC); API SN Plus; ILSAC GF-5; ACEA A1/B1
Fabrication: Fully synthetic
Approvals: GM dexos1™ Gen 2
Categories: Motor oils for passenger cars USVO®
Recommendations: Chrysler MS-6395; Chrysler MS-13340; Ford WSS-M2C947-A; Ford WSS-M2C947-B1

RAVENOL DFE SAE 0W-20 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL DFE SAE 0W-20 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. RAVENOL DFE...

RAVENOL DXG SAE 5W-30

Viscosity: 5W-30; Fully synthetic
Specifications: API SN Plus; API SN (RC); ILSAC GF-5; API SN Resource Conserving
Fabrication: Fully synthetic
Approvals: GM dexos1™ Gen 2
Categories: Motor oils for passenger cars USVO®
Recommendations: Ford WSS-M2C946-B1; Chrysler MS-6395; Chrysler MS-13340; Fiat 9.55535-CR1; Ford WSS-M2C946-A; Honda/Acura HTO-06

RAVENOL DXG SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection. For the development of RAVENOL DXG SAE 5W-30 the proven formulation of tri-nuclear molybdenum, tungsten and OFM (Organic Friction Modifiers) was used. A highly polar Group V base oil was used in this formula, which has good compatibility with the PAO used. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction...

RAVENOL ECS SAE 0W-20

Viscosity: 0W-20; Fully synthetic
Specifications: API RC; ILSAC GF-5; ACEA C5; ACEA A1/B1
Fabrication: Fully synthetic
Approvals: MB-Freigabe 229.71; Jaguar Land Rover STJLR.51.5122
Categories: Motor oils for passenger cars USVO®
Recommendations: Ford WSS-M2C947-A; GM dexos1® (First Generation); GM 6094 M; Chrysler MS-6395; Mitsubishi; MAZDA; Suzuki; Toyota; Honda/Acura HTO-6; Subaru; Lexus; Infiniti; Cadillac; Chevrolet; Buick

RAVENOL Eco Synth ECS SAE 0W-20 is a PAO (Poly-alpha-olefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL Eco Synth ECS SAE 0W-20 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving...

RAVENOL EFE SAE 0W-16

Viscosity: 0W-16; Fully synthetic
Specifications: API SN
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars USVO®
Recommendations: Honda 08232-P99S1LHE; Honda 08216-99974; Honda 08215-99974; Honda Ultra Next; Honda Ultra Green; Hybrid Engine Nissan KLANM-01A04 Extra Save X Eco; Mitsubishi MZ102661; Mitsubishi MZ102662; Mitsubishi DiaQueen ECO Plus; Toyota 08880-11005

RAVENOL Extra Fuel Economy EFE SAE 0W-16 is the worldwide first motor oil with license approval from API with its specification API SN and viscosity SAE 0W-16.Differences from competitor products PDF Fuel Consumption Testing of RAVENOL EFE 0W-16 and the Synthetic Motor Oil SAE 5W-30 ACEA C3 VideoRAVENOL Extra Fuel Economy EFE SAE 0W-16 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection. RAVENOL Extra Fuel Economy EFE SAE 0W-16 is recommended especially for hybrid vehicles. RAVENOL Extra Fuel Economy EFE SAE 0W-16 was formulated with tri-nuclear molybdenum and OFM (Organic Friction Modifiers), in order to achieve minimal friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL Extra Fuel Economy EFE SAE 0W-16 provides a safe layer of...

RAVENOL EFS SAE 0W-20

Viscosity: 0W-20; Fully synthetic
Specifications: API SN Plus (RC); ACEA C5; ILSAC GF-5
Fabrication: Fully synthetic
Approvals: BMW Longlife-17 FE+; VOLVO VCC RBS0-2AE 0W-20 - Service Fill
Categories: Motor oils for passenger cars USVO®
Recommendations: Chrysler MS-13340; MB 229.71; Honda; MAZDA; Suzuki; Toyota; Herstellervorschriften beachten

RAVENOL Eco Synth EFS SAE 0W-20 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. RAVENOL Eco Synth EFS SAE 0W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL Eco Synth EFS SAE 0W-20 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL Eco Synth EFS SAE 0W-20 helps to protect the environment by reducing emissions. RAVENOL Eco Synth EFS SAE 0W-20 helps to avoid low speed pre-ignition LSPI (Low Speed Pre-ignition). This can help avoid engine damage.
Extended oil...

RAVENOL FDS SAE 5W-30

Viscosity: 5W-30; Fully synthetic
Specifications: API CF; API SL; ACEA A1/B1; ACEA A5/B5
Fabrication: Fully synthetic
Approvals: MB-Freigabe 229.6; Renault RN0700; Ford WSS-M2C913-D; JAGUAR LAND ROVER STJLR.03.5003
Categories: Motor oils for passenger cars USVO®
Recommendations: Ford WSS-M2C913-C; Fiat 9.55535-G1

RAVENOL FDS SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL FDS SAE 5W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. ...

RAVENOL FES SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: ACEA C2
Fabrication: Fully synthetic
Approvals: BMW Longlife-12 FE
Categories: Motor oils for passenger cars USVO®
Recommendations: Chrysler MS-13340; FIAT 9.55535-DS1; FIAT 9.55535-GS1; IVECO 18-1811 CLASSE SC1 LV; Jaguar Land Rover STJLR.03.5007; PSA B71 2290; PSA B71 2312

RAVENOL FES SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL FES SAE 0W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. RA...

RAVENOL HFE SAE 5W-16

Specifications: API SN
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars USVO®
Recommendations: Honda 08215-99974; Honda 08216-99974; Honda 08232-P99S1LHE; Honda Ultra Next; Honda Ultra Green; Honda Hybrid Engine; Nissan KLANM-01A04 Extra Save X Eco; Mitsubishi MZ102661; Mitsubishi MZ102662; Mitsubishi DiaQueen ECO Plus; Toyota 0880-11005

RAVENOL High Fuel Economy HFE SAE 5W-16 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection. RAVENOL High Fuel Economy HFE SAE 5W-16 was formulated with tri-nuclear molybdenum and OFM (Organic Friction Modifiers), in order to achieve minimal friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL High Fuel Economy HFE SAE 5W-16 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL High Fuel Economy HFE SAE 5W-16 helps to protect the environment by reducing emissions. Extended oil change intervals...

RAVENOL SFE SAE 5W-20

Viscosity: 5W-20; Fully synthetic
Specifications: ACEA A1; ILSAC GF-5; ACEA A5; ACEA B5
Fabrication: Fully synthetic
Approvals: Jaguar Land Rover STJLR.03.5004
Categories: Motor oils for passenger cars USVO®
Recommendations: FORD WSS-M2C930-A; FORD WSS-M2C930-B; Ford WSS-M2C925-A; Ford WSS-M2C925-B; Ford WSS-M2C948-B; Chrysler MS-6395; Nissan; Mazda; Suzuki; Toyota; Fiat 9.55535-CR1; Honda/Acura HTO-06

RAVENOL Super Fuel Economy SFE SAE 5W-20 is an universal fuel-efficient engine oil, a top-quality product for modern passenger cars with gasoline and diesel engines of the latest generation. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL Super Fuel Economy SFE SAE 5W-20 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. RAVENOL Super Fuel Economy SFE SAE 5W-20 ...

RAVENOL SSL SAE 0W-40

Viscosity: 0W-40; Fully synthetic
Specifications: API SN; API CF; ACEA A3/B4
Fabrication: Fully synthetic
Approvals: MB-Approval 229.5; Renault RN0700; Renault RN0710; Porsche A40; BMW Longlife-01; MB-Freigabe 226.5
Categories: Motor oils for passenger cars USVO®
Recommendations: MB 229.3; Chrysler MS-12633; Chrysler MS-10725; Ford WSS-M2C937-A

RAVENOL Super Synthetik Öl SSL SAE 0W-40 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL Super Synthetik Öl SSL SAE 0W-40 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly...

RAVENOL SSO SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: API CF; API SN; ACEA A3; ACEA B4
Fabrication: Fully synthetic
Approvals: BMW Longlife-98; MB-Approval 229.5; Renault RN0700; Renault RN0710; VW 502 00; VW 505 00; VOLVO VCC 95200356 (Service Fill)
Categories: Motor oils for passenger cars USVO®
Recommendations: VW 503 01(Audi); GM-LL-A-025; GM-LL-B-025; BMW Longlife-01

RAVENOL SSO SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL SSO SAE 0W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. ...

RAVENOL SSV SAE 0W-30

Viscosity: 0W-30
Specifications: API SL; ACEA A5; ACEA B5
Approvals: VOLVO VCC 95200377 (Service Fill); MB-Freigabe 229.6
Categories: Motor oils for passenger cars USVO®
Recommendations: MB 229.6

RAVENOL SSV Fuel Economy SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. RAVENOL SSV Fuel Economy SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL SSV Fuel Economy SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL SSV Fuel Economy SAE 0W-30 helps to protect the environment by reducing emissions. Extended oil change intervals according to the manufacturer’s instructions.

RAVENOL VMP SAE 5W-30

Viscosity: 5W-30; Fully synthetic
Specifications: API SN; ACEA C3
Fabrication: Fully synthetic
Approvals: BMW Longlife-04; MB-Approval 229.51; Porsche C30; VW 507 00; VW 507 00
Categories: Motor oils for passenger cars USVO®
Recommendations: BMW/Mini 83 21 0 398 508; Audi Motorsport V31 748 026; Audi/Volkswagen G 052 195 M6; Audi/Volkswagen G 052 195 M4; Audi/Volkswagen G 052 195 M2; MB 229.31; Fiat 9.55535-S1; BMW 83 21 0 398 507; Mercedes Benz 000 989 89 01 10; Chrysler MS-11106; MB 000 989 89 01 10

RAVENOL VMP SAE 5W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.
RAVENOL VMP SAE 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced...

RAVENOL VSE SAE 0W-20

Viscosity: 0W-20; Fully synthetic
Specifications: ACEA C5
Fabrication: Fully synthetic
Approvals: VW 509 00; VW 508 00; Porsche C20
Categories: Motor oils for passenger cars USVO®

RAVENOL VSE SAE 0W-20 isa PAO (Poly-alpha-olefin) based fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.RAVENOL VSE SAE 0W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics. RAVENOL VSE SAE 0W-20 has a high viscosity index because of its formulation with...

RAVENOL VSF SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: ACEA C2
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars USVO®
Recommendations: Ford WSS-M2C950-A; Jaguar Land Rover STJLR.03.5007

RAVENOL VSF SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic motor oil with special USVO® and proven CleanSynto® technology for car diesel engines with and without turbocharging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible for the product to have no shear losses during the entire replacement interval and to be extremely resistant to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL VSF SAE 0W-30 uses the positive properties of tungsten, which greatly smoothes the surface structure in the engine, reducing friction and wear and significantly improving mechanical efficiency.

RAVENOL VSF SAE 0W-30 achieves...

RAVENOL VSI SAE 5W-40

Viscosity: 5W-40; Fully synthetic
Specifications: API SN; API CF; ACEA A3; ACEA B4
Fabrication: Fully synthetic
Approvals: MB-Approval 229.3; VW 502 00; VW 505 00; Porsche A40; Renault RN0700; Renault RN0710
Categories: Motor oils for passenger cars USVO®
Recommendations: MB 226.5; MB 229.5; BMW Longlife-01; Opel GM-LL-B-025; Fiat 9.55535-H2; Chrysler MS-10850; Chrysler PSA B71 2296; Chrysler MS-10896

RAVENOL VSI SAE 5W-40 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. RAVENOL VSI SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL VSI SAE 5W-40 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL VSI SAE 5W-40 helps to protect the environment by reducing emissions. RAVENOL VSI SAE 5W-40 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving. Extended oil change intervals...

RAVENOL VST SAE 5W-40

Viscosity: 5W-40; Fully synthetic
Specifications: API SN; API CF; ACEA A3; ACEA B4
Fabrication: Fully synthetic
Approvals: MB-Approval 229.5; Porsche A40; VW 502 00; VW 505 00; BMW Longlife-01; Renault RN0700; Renault RN0710
Categories: Motor oils for passenger cars USVO®
Recommendations: MB 229.3; MB 226.5; Opel GM-LL-B-025; Fiat 9.55535-Z2; Chrysler MS-12991 (replaces references to MS-10896), MS-10850, MS-10725 (Fiat 9.55535-GH2 and Fiat 9.55535-Z2); Chrysler MS-10850; Chrysler MS-10725 (Fiat 9.55535-GH2 und Fiat 9.55535-Z2 ); Chrysler PSA B71 2296

RAVENOL VollSynth Turbo VST SAE 5W-40 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient. RAVENOL VollSynth Turbo VST SAE 5W-40 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving...

RAVENOL VSW SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: ACEA C3
Fabrication: Fully synthetic
Approvals: VW 504 00; VW 507 00
Categories: Motor oils for passenger cars USVO®
Recommendations: Chrysler MS-11106

RAVENOL VSW SAE 0W-30 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. RAVENOL VSW SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. With its new formulation, RAVENOL VSW SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. RAVENOL VSW SAE 0W-30 lengthens the service life of the diesel particulate filter by reducing the concentration of ash-forming particles in the exhaust gas. It reduces the emissions of gases which are harmful to the environment. It delivers a higher degree of security by providing lasting protection for engines. By...

RAVENOL DLO SAE 10W-40

Viscosity: 10W-40; Semi-synthetic
Specifications: API CF; ACEA A3/B4
Fabrication: Semi-synthetic
Approvals: MB-Freigabe 229.1; VW 505 01; VW 505 00; BMW Special Oil
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 500 00

RAVENOL DLO SAE 10W-40 is a semi synthetic engine oil with CleanSynto® Technology for passenger car diesel engines with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption. Offers excellent cold start protection and is suitable for extended oil drain intervals according to manufacturer's instructions.
RAVENOL DLO SAE 10W-40 contains less than 30 % Polyalphaolefins (PAO). k

RAVENOL EHS SAE 0W-20

Specifications: API SN (RC); ILSAC GF-5; ACEA A1/B1
Fabrication: synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Chrysler MS-6395; GM 6094M; GM dexos 1 Gen 1; Ford WSS-M2C947-A; Jaguar Land Rover STJLR.51.5122; MB 229.71; Mitsubishi; MAZDA; Suzuki; Honda/Acura HTO-6; Toyota; Subaru; Nissan; Lexus; Infiniti; Cadillac; Chevrolet; Buick

RAVENOL EHS SAE 0W-20 is synthetic, low-friction engine oil with CleanSynto® technology for car gasoline and diesel engines, with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption, and is suitable for extended oil drain intervals according to manufacturer's instructions. RAVENOL EHS SAE 0W-20 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By a significant fuel economy RAVENOL EHS SAE 0W-20 contributes by reducing emissions to protect the environment. RAVENOL EHS SAE 0W-20 ensures compliance with the viscosity class even over long oil runtimes over the entire oil change interval.

RAVENOL FEL SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SN; API CF; ACEA C2
Fabrication: synthetic
Approvals: JASO DL-1 (D049RAV111)
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: MAZDA 183419; Chrysler MS-13340; Fiat 9.55535-S1; HONDA i-DTEC; HONDA i-CTDi; IVECO 18-1811 CLASSE SC1; MAZDA MZR-CD; MAZDA MZ-CD; MAZDA CiTD; MAZDA 183418; PSA B71 2290; TOYOTA 08880-83389; TOYOTA 08880-83388; SUBARU Boxer Diesel; SUZUKI

RAVENOL FEL SAE 5W-30 is a synthetic, Mid SAPS low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
RAVENOL FEL SAE 5W-30 is based on additives with low ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS >2,9 mPa*s. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL FEL SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in the cold running phase. Because of a considerable fuel saving RAVENOL FEL SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL...

RAVENOL FLJ SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: ACEA C1
Fabrication: synthetic
Approvals: Jaguar Land Rover STJLR.03.5005
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: FORD WSS-M2C934-A /-B; MAZDA; Mitsubishi

RAVENOL FLJ SAE 5W-30 is a synthetic, Low SAPS, low friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
RAVENOL FLJ SAE 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS >2.9mPa*s. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL FLJ SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL FLJ SAE 5W-30 contributes to protect the environment by reducing the...

RAVENOL FO SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API CF; API SL; ACEA A5; ACEA B5
Fabrication: synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Fiat 9.55535-G1; Ford WSS-M2C913-D (überdeckt 913-A/-B/-C); Jaguar Land Rover STJLR.03.5003; MB 229.6; RENAULT RN0700

RAVENOL FO SAE 5W-30 is modern synthetic high performance low friction multigrade engine oil, which ensures the high viscosity index because of formulation with special base oils. RAVENOL FO SAE 5W-30 has excellent characteristics because of it’s carefully selected highly effective additive. The excellent cold start characteristics provide the optimal lubricating safety in the cold-running phase. Because of the noticeable fuel economy contributes RAVENOL FO SAE 5W-30 the reduction of pollutant emissions and protecting the environment.

RAVENOL GFE SAE 5W-20

Viscosity: 5W-20; synthetic
Specifications: API SN Plus
Fabrication: synthetic
Approvals: GM dexos1™ Gen 2
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Ford WSS-M2C945-B1; Chrysler MS-13340

RAVENOL GFE SAE 5W-20 is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection. RAVENOL GFE SAE 5W-20 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL GFE SAE 5W-20 contributes to protect the environment by reducing the emissions. RAVENOL GFE SAE 5W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics. RAVENOL GFE SAE 5W-20 also meets the specification WSS-M2C945-B1 and API SN PLUS, therefore it can reduce the problem of oil derived low speed pre-ignition. Suitable for extended oil change intervals where recommended by manufacturer.

RAVENOL HCL SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SL; API CF; ACEA A3/B4
Fabrication: synthetic
Approvals: MB-Approval 229.5; BMW Longlife-01; VW 502 00; VW 505 00
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 501 01

RAVENOL HCL SAE 5W-30 is a synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimises friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.

RAVENOL HCS SAE 5W-40

Viscosity: 5W-40; synthetic
Fabrication: synthetic
Approvals: MB-Approval 229.3; VW 502 00; VW 505 00; Renault RN0700; Renault RN0710
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: BMW Longlife-01; Opel GM-LL-B-025; Porsche A40; Chrysler MS-10850; PSA B71 2296; Fiat 9.55535-H2

RAVENOL HCS SAE 5W-40 is synthetic high performance motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Formulated to minimise friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.

RAVENOL HDS Hydrocrack Diesel Specific SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: ACEA C4
Fabrication: synthetic
Approvals: Renault RN0720; MB-Approval 226.51
Categories: Motor oils for passenger cars CleanSynto®

RAVENOL HDS Hydrocrack Diesel Specific 5W-30 is a synthetic, Low SAPS low-friction engine oil with CleanSynto® technology for passenger car diesel engines, with and without turbocharging and direct injection.
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS- Viscosity >3.5 mPa*s (cP). Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL HDS Hydrocrack...

RAVENOL HDX SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SN Plus; ILSAC GF-5; API SN Resource Conserving
Fabrication: synthetic
Approvals: GM dexos1™ Gen 2
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Chrysler MS-6395; Chrysler MS-13340; Fiat 9.55535-CR1; Ford WSS-M2C946-A; Ford WSS-M2C946-B1; Ford WSS-M2C929-A; Honda/Acura HTO-06

RAVENOL HDX SAE 5W-30 is a synthetic, low-friction engine oil with CleanSynto® technology for car gasoline engines, with and without turbocharging and direct injection, such as Turbo-GDI and direct injection. With its new formulation, RAVENOL HDX SAE 5W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. RAVENOL HDX SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL HDX SAE 5W-30 contributes to protect the environment by reducing the emissions. RAVENOL HDX SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. RAVENOL HDX SAE 5W-30 helps to avoid low speed pre-ignition LSPI (Low Speed Pre-ignition). This can help avoid engine damage....

RAVENOL HLS SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SN; API CF; ACEA C3
Fabrication: synthetic
Approvals: MB-Freigabe 229.51; MB-Freigabe 229.52; BMW Longlife-04; GM dexos2™
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: MB 229.31; VW 502 00; VW 505 00; VW 505 01; Fiat 9.55535-S3; Chrysler MS-11106

Mid SAPS RAVENOL HLS SAE 5W-30 is synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimisation of friction, abrasion and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to manufacturer's recommendations. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy RAVENOL HLS SAE 5W-30 contributes the reduction of pollutant emissions and protecting the environment. RAVENOL HLS SAE 5W-30 is Mid SAPS Oils which prevents effectively the reset of the diesel soot particulate filter.

RAVENOL HPS SAE 5W-30

Viscosity: 5W-30; Semi-synthetic
Specifications: API SL; API CF; ACEA A3/B4
Fabrication: Semi-synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: MB 229.3; BMW Longlife-98; VW 502 00; VW 505 00

HyperSynthRAVENOL HPS SAE 5W-30 is modern high performance low friction semi-synthetic multigrade motor oil, which is suitable for performance motors because of its synthetic components and innovative additives. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy contributes RAVENOL HPS SAE 5W-30 the reduction of pollutant emissions and protects the environment.

RAVENOL HST SAE 5W-40

Viscosity: 5W-40; synthetic
Specifications: API SN; API CF
Fabrication: synthetic
Approvals: MB-Approval 229.5; BMW Longlife-01; Renault RN0700; Renault RN0710; VW 502 00; VW 505 00; Porsche A40
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: MB 229.3; MB 226.5; Opel GM-LL-B-025; Fiat 9.55535-Z2; Chrysler MS-12991, MS-10850, MS-10725; PSA B71 2296

RAVENOL HST SAE 5W-40 is a motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection, formulated with synthetic base oils. Minimises friction, wear and fuel consumption with excellent cold start characteristics. Extended oil change intervals according to manufacturer’s recommendation. RAVENOL HST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.

RAVENOL LLO SAE 10W-40

Viscosity: 10W-40; Semi-synthetic
Specifications: API SN; ACEA A3/B4
Fabrication: Semi-synthetic
Approvals: MB-Freigabe 229.1
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 500 00/ 505 00; BMW Special Oil

RAVENOL LLO SAE 10W-40 is a semi-synthetic high-performance light-running engine oil with CleanSynto® technology for passenger car carburetor and diesel engines with and without turbocharging and direct injection. Minimizing friction, wear and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to the manufacturer 's instructions. RAVENOL LLO SAE 10W-40 is produced on the basis of hydro crack oils which correspond to the high tech demands.

RAVENOL SMO SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: ACEA A1; ILSAC GF-5
Fabrication: synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Ford WSS-M2C946-A, Ford WSS-M2C929-A, Chrysler MS-6395; GM 6094 M; Fiat 9.55535-CR1; Nissan; Subaru; Toyota; Ford; Chrysler; Lexus; MAZDA

RAVENOL SMO SAE 5W-30 Synthetic Multi Oilis synthetic low friction motor oil with CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection. Minimisation of friction, abrasion and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to manufacturer's recommendations. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy RAVENOL SMO SAE 5W-30 contributesthe reduction of pollutant emissions and protecting the environment.

RAVENOL SMP SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SN; ACEA C3
Fabrication: synthetic
Approvals: BMW Longlife-04; MB-Approval 229.51; Porsche C30; VW 504 00; VW 507 00
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Audi/Volkswagen G 052 195 M2; Audi/Volkswagen G 052 195 M4; Audi/Volkswagen G 052 195 M6; BMW 83 21 0 398 507; BMW/Mini 83 21 0 398 508; Chrysler MS-11106; Fiat 9.55535-S1; MB 229.31; Mercedes Benz 000 989 89 01 10; Herstellervorschriften beachten

RAVENOL SMP SAE 5W-30 is a Mid SAPS low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
RAVENOL SMP SAE 5W-30 is based on synthetic base oils and contains additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL SMP SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures an optimal lubrication safety in the cold running phase. Because of a considerable fuel saving RAVENOL SMP SAE 5W-30 contributes to protect the environment by reducing the emissions.
...

RAVENOL STS SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SL; API CF; ACEA A3; ACEA B4
Fabrication: synthetic
Categories: Motor oils for passenger cars CleanSynto®

RAVENOL STS SAE 5W-30 is modern high performance low friction synthetic multigrade motor oil with CleanSynto® technology, formulated with PAO (Polyalphaolefines), which is suitable for performance motors because of its synthetic components and innovative additives. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy contributes RAVENOL STS SAE 5W-30 the reduction of pollutant emissions and protects the environment. RAVENOL STS SAE 5W-30 is specifically designed to meet the needs of our customers in the Middle East and North Africa. RAVENOL STS SAE 5W-30 was adapted to the difficult conditions there and covered a particularly wide range of vehicles.

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30

Viscosity: 0W-30; synthetic
Specifications: API SM; ACEA A3; ACEA B4
Fabrication: synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: MB 229.3; VW 502 00; VW 505 00; BMW Longlife-98; Renault RN0710

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 is a synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimises friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer. RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 has a high viscosity index because of its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

RAVENOL TSi SAE 10W-40

Viscosity: 10W-40; Semi-synthetic
Specifications: ACEA A3; ACEA B4; API SN; API SM; API CF
Fabrication: Semi-synthetic
Approvals: VW 501 01; MB-Freigabe 229.1; VW 505 00; BMW Special Oil
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 502 00/ 500 00; MB 229.3

RAVENOL TSi SAE 10W-40 is a high additive treated engine oil which allows an energy-saving operation because of its additivation, choice of base oils and viscosity adjustment. In order to guarantee the low viscosity of the SAE class 10W as well as a low evaporation loss RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils and polyalphaolefins (PAO) which correspond to the high tech demands. RAVENOL TSi SAE 10W-40 contains less than 30 % Polyalphaolefins (PAO).

RAVENOL TSJ SAE 10W-30

Viscosity: 10W-30; Semi-synthetic
Specifications: API SN; API CF; ILSAC GF-5; ACEA A3; ACEA B4
Fabrication: Semi-synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Toyota; HONDA; Mitsubishi; MAZDA; Suzuki; Isuzu; Subaru; Daihatsu; KIA; Hyundai; SsangYong; Daewoo; Fiat 9.55535-CR1; Chrysler MS-6395

RAVENOL TSJ SAE 10W-30 is a semi-synthetic low friction motor oil with CleanSynto® technology with polyalphaolefin for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Formulated to minimise friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer. RAVENOL TSJ SAE 10W-30 is especially produced for the use in cars of Japanese and Asian manufacturers.

RAVENOL VDL SAE 5W-40

Viscosity: 5W-40; Fully synthetic
Specifications: API CF; ACEA B3; ACEA B4
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 505 00; BMW Longlife-98; MB 229.3; Opel GM-LL-B-025; TOYOTA Common Rail; Mitsubishi

RAVENOL VDL SAE 5W-40 is a fully synthetic, low-friction engine oil with CleanSynto® Technology for passenger car diesel engines with or without turbo-charging and direct injection. RAVENOL VDL SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL VDL SAE 5W-40 contributes to protect the environment by reducing the emissions. RAVENOL VDL SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.

RAVENOL VFE SAE 5W-20

Viscosity: 5W-20; synthetic
Specifications: ACEA A1; API CF; ILSAC GF-5; ACEA A5; ACEA B5
Fabrication: synthetic
Approvals: License: API SN (RC), ILSAC GF-5
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Ford WSS-M2C930-A; Ford WSS-M2C930-B; Ford WSS-M2C925-A/B; Ford WSS-M2C948-B; Jaguar Land Rover STJLR.03.5004; Chrysler MS-6395; Nissan; MAZDA; Suzuki; Toyota; Fiat 9.55535-CR1; Honda/Acura HTO-6

RAVENOL VFE SAE 5W-20 is synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer. RAVENOL VFE SAE 5W-20 has a high viscosity index because of its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL VFE SAE 5W-20 contributes to protect the environment by reducing the emissions.

RAVENOL VMO SAE 5W-40

Viscosity: 5W-40; synthetic
Specifications: API SN; API CF; ACEA C3
Fabrication: synthetic
Approvals: MB-Freigabe 229.31; BMW Longlife-04; GM Dexos 2; MB-Approval 229.51; VW 505 00; VW 505 01
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Porsche A40; Ford WSS-M2C917-A; Fiat 9.55535-S2; Fiat 9.55535-GH2; Chrysler MS-11106; VW 502 00

RAVENOL VMO SAE 5W-40 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
RAVENOL VMO SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
RAVENOL VMO SAE 5W-40 extends long life of DPF and TWC. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL VMO SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Because of a considerable fuel saving RAVENOL VMO SAE 5W-40 contributes to protect the environment by reducing the emissions.
Suitable for extended oil change intervals where recommended by manufacturer.

RAVENOL VMS SAE 5W-30

Viscosity: 5W-30; synthetic
Specifications: API SN; ACEA C3
Fabrication: synthetic
Approvals: MB-Approval 229.31; MB-Approval 229.51; MB-Approval 229.52
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: Chrysler MS-11106

RAVENOL VMS SAE 5W-30 is synthetic low friction motor oil with CleanSynto® technology for Daimler passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimisation of friction, abrasion and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to manufacturer's recommendations. The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy RAVENOL VMS SAE 5W-30 contributes the reduction of pollutant emissions and protecting the environment. RAVENOL VMS SAE 5W-30 is Oil which prevents effectively the clogging of the diesel soot particulate filter.

RAVENOL WIV SAE 0W-30

Viscosity: 0W-30; Fully synthetic
Specifications: ACEA A5; ACEA B5
Fabrication: Fully synthetic
Categories: Motor oils for passenger cars CleanSynto®
Recommendations: VW 503 00/ 506 00/ 506 01

RAVENOL WIV SAE 0W-30 is a fully synthetic low friction engine oil with CleanSynto® technology for VW and Audi petrol engines and diesel engines (from model year 2000 with interchange interval WIV) including pump-nozzle engines (Pumpe-Düse-Motoren). Minimizing friction, wear and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to the manufacturer's instructions. RAVENOL WIV SAE 0W-30 has been specially developed for VW and Audi petrol engines and diesel engines (from model year 2000 with intermittent extension WIV) including pump-nozzle engines. It allows significantly longer maintenance intervals. Excellent cold start characteristics due to a faster oiling of the system. It ensures reduced friction losses and high oil film stability as well as excellent viscosity-temperature behavior.

RAVENOL HVE High Viscosity Ester Oil SAE 10W-50

Viscosity: 10W-50; synthetic
Specifications: API SN; API CF; ACEA A3/B4
Fabrication: synthetic
Categories: High Mileage motor oils

RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 is particularly recommended for high mileage vehicles from approx. 100,000 km. It is equally suitable for both petrol and diesel engines with or without a turbocharger and direct fuel injection RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 is a newly developed synthetic motor oil with a unique formula, specially designed for high mileage vehicles. Thanks to the additives in our RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 which offer exceptional cleaning and maintenance for your engine, critical engine components are restored and seals are given extra protection. This means that the service life of vehicles can be extended, particularly in older, higher mileage vehicles. RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 has excellent lubricating film adhesion and high shear stability. Its engine-maintaining additives help to reduce oil consumption, offering protection against both sludge formation and wear and tear.

RAVENOL HVP High Viscosity Perform. Oil SAE 15W-50

Viscosity: 15W-50; Semi-synthetic
Specifications: API SN; API CF; ACEA A3/B4
Fabrication: Semi-synthetic
Categories: High Mileage motor oils

RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 is particularly recommended for vehicles with high mileage, petrol and diesel engines, with and without turbocharge and direct injection. The semi-synthetic motor oil RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. The extremely conditioning and cleaning additives in RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage. RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.

RAVENOL HVS High Viscosity Synto Oil SAE 10W-60

Viscosity: 10W-60; synthetic
Specifications: API SN; API CF; ACEA A3/B4
Fabrication: synthetic
Categories: High Mileage motor oils

RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 is particularly recommended for high mileage vehicles from approx. 100,000 km. It is equally suitable for both petrol and diesel engines with or without a turbocharger and direct fuel injection. RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 is a newly developed synthetic motor oil with a unique formula, specially designed for high mileage vehicles.. Thanks to the additives in our RAVENOL HVS High Viscosity Synto Oil SAE 10W-60, which offer exceptional cleaning and maintenance for your engine, critical engine components are restored and seals are given extra protection. This means that the service life of vehicles can be extended, particularly in older, higher mileage vehicles. RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 has excellent lubricating film adhesion and high shear stability. Its engine-maintaining additives help to reduce oil consumption, offering protection against both sludge formation and wear and tear. ...

RAVENOL HVT High Viscosity Turbo Oil SAE 5W-50

Viscosity: 5W-50; synthetic
Specifications: API SN; API CF; ACEA A3/B4
Fabrication: synthetic
Categories: High Mileage motor oils

The synthetic motor oil RAVENOL HVT High Viscosity Turbo Oil SAE 5W-50 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. RAVENOL HVT High Viscosity Turbo Oil SAE 5W-50 is particularly recommended for vehicles with high mileage, petrol and diesel engines, with and without turbocharge and direct injection. The extremely conditioning and cleaning additives in RAVENOL HVT High Viscosity Turbo Oil SAE 5W-50 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage. RAVENOL HVT High Viscosity Turbo Oil SAE 5W-50 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.

RAVENOL SVE Standard Viscosity Ester Oil SAE 5W-30

Viscosity: 5W-30; Semi-synthetic
Specifications: API SL; API CF; ACEA A3; ACEA B4
Fabrication: Semi-synthetic
Categories: High Mileage motor oils
Recommendations: MB 229.5; BMW Longlife-01; VW 501 01/ 502 00/ 505 00

The semi synthetic motor oil RAVENOL SVE Standard Viscosity Ester Oil SAE 5W-30 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. RAVENOL SVE Standard Viscosity Ester Oil SAE 5W-30 is particularly recommended for vehicles with high mileage, petrol and diesel engines, with and without turbocharge and direct injection. The extremely conditioning and cleaning additives in RAVENOL SVE Standard Viscosity Ester Oil SAE 5W-30 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage. RAVENOL SVE Standard Viscosity Ester Oil SAE 5W-30 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.

RAVENOL SVP Stand. Viscos. Perform. Oil SAE 15W-40

Viscosity: 15W-40; mineral
Specifications: API SJ; API CF; ACEA A3; ACEA B4
Fabrication: mineral
Categories: High Mileage motor oils
Recommendations: MAN 271; ZF TE-ML 07C; VW 505 00

RAVENOL SVP Standard Viscosity Performance Oil SAE 15W-40 is particularly recommended for vehicles with high mileage petrol and diesel engines with and without turbocharge and direct injection. The mineral motor oil RAVENOL SVP Standard Viscosity Performance Oil SAE 15W-40 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. The extremely conditioning and cleaning agents in RAVENOL SVP Standard Viscosity Performance Oil SAE 15W-40 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage. RAVENOL SVP Standard Viscosity Performance Oil SAE 15W-40 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.

RAVENOL SVS Standard Viscosity Synto Oil SAE 5W-40

Viscosity: 5W-40; synthetic
Specifications: API SN; API CF; ACEA A3; ACEA B4
Fabrication: synthetic
Categories: High Mileage motor oils
Recommendations: MB 229.5; Porsche A40; BMW Longlife-01; Opel GM-LL-B-025, Renault RN0700 / RN0710

The synthetic motor oil RAVENOL SVS Standard Viscosity Synto Oil SAE 5W-40 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. RAVENOL SVS Standard Viscosity Synto Oil SAE 5W-40 is particularly recommended for vehicles with high mileage petrol and diesel engines with and without turbocharge and direct injection. The extremely conditioning and cleaning agents in RAVENOL SVS Standard Viscosity Synto Oil SAE 5W-40 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage. RAVENOL SVS Standard Viscosity Synto Oil SAE 5W-40 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.

RAVENOL SVT Stand. Viscosity Turbo Oil SAE 10W-40

Viscosity: 10W-40; Semi-synthetic
Specifications: API SM; API CF; ACEA A3; ACEA B4
Fabrication: Semi-synthetic
Categories: High Mileage motor oils
Recommendations: MB 229.1; VW 505 00/ 501 00; VW 502 00/ 500 00; BMW Special Oil

RAVENOL SVT Standard Viscosity Turbo Oil SAE 10W-40 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear. The semi synthetic motor oil RAVENOL SVT Standard Viscosity Turbo Oil SAE 10W-40 is a new development with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more. RAVENOL SVT Standard Viscosity Turbo Oil SAE 10W-40 is particularly recommended for vehicles with high mileage, petrol and diesel engines, with and without turbocharge and direct injection. The extremely conditioning and cleaning additives in RAVENOL SVT Standard Viscosity Turbo Oil SAE 10W-40 revitalise critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage.