RAVENOL Group: Ravensberger Schmierstoffvertrieb GmbH since 1946 and Deutsche Ölwerke Lubmin GmbH since 2013
RAVENOL Group: Ravensberger Schmierstoffvertrieb GmbH since 1946 and Deutsche Ölwerke Lubmin GmbH since 2013

RAVENOL FEL SAE 5W-30

Category: Passenger car motor oil
Item number: 1111123
Viscosity: 5W-30
Specification: ACEA C2, API CF, API SN, JASO DL-1
Oil type: Synthetic
Application: Passenger car
Technology: Clean Synto®

RAVENOL FEL SAE 5W-30 is a synthetic, Mid SAPS low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.

RAVENOL FEL SAE 5W-30 is based on additives with low ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS >2,9 mPa*s. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).

RAVENOL FEL SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in the cold running phase.

Because of a considerable fuel saving RAVENOL FEL SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL FEL SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL FEL SAE 5W-30 is an universal fuel economy, especially collected engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter. Due to the specific composition is RAVENOL FEL SAE 5W-30 excellent suitable for use for indicated OEM requirements.

Characteristics

  • Fuel economy in part and full power operation
  • Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
  • Excellent cold starting characteristics also at low temperatures below -25°C
  • A safe lubricant film at high operating temperatures
  • Low evaporative tendency, so lower oil consumption
  • No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
  • Neutrality towards sealing materials
  • Extended oil change intervals to protect natural resources

Technical Product Data

PropertyUnitDataAudit
Density at 20 °Ckg/m³850,0EN ISO 12185
ColourgelbbraunVISUELL
Viscosity at 100 °Cmm²/s10,7DIN 51562-1
Viscosity at 40 °Cmm²/s61,4DIN 51562-1
Viscosity Index VI166DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s3,2ASTM D5481
CCS Viscosity at -30 °CmPa*s4765ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °CmPa*s16.100ASTM D4684
Pourpoint°C-42DIN ISO 3016
Noack Volatility% M/M9,0ASTM D5800
Flashpoint°C240DIN EN ISO 2592
tbnmg KOH/g7,7ASTM D2896
Sulphated Ash%wt.0,53DIN 51575

All indicated data are approximate values and are subject to the commercial fluctuations.

Download PDF
This website already uses the necessary cookies, which are necessary for the correct operation of the program.