RAVENOL AWD-H Fluid
- Fabrication
- Fully synthetic
- Categories
- Special hydraulic fluids
- Recommendations
- BMW 83 22 2 413 513
- VW G 060 175 A2
- VW G 055 175 A2
- VW G 052 175 A2
- Volvo 31367940
- Opel 1940 057
- Land Rover LR003136 (Haldex-Öl Baujahr 2011-2014)
- Land Rover LR054941
- GM 93165387
RAVENOL AWD-H FLUID is a high-quality formula of high-performance oils with special additives and inhibitors.
RAVENOL AWD-H FLUID is a special high-performance transmission oil for Haldex's Allrad, Quattro and 4motion powertrains.
How the Hadlex coupling operates: The axle closest to the engine is constantly powered. All-wheel drive powertrains with a Haldex coupling automatically direct engine power to the other axle where required, without any intervention from the driver. Depending on the electronically-controlled blocking effect of the Haldex coupling, a variable proportion of the engine power is transferred to this axle as required.
RAVENOL AWD-H FLUID supports this power transfer process with its outstanding qualities.
Click here for the oil test analysis
Application Notes
RAVENOL AWD-H FLUID is suitable for use with all-wheel drive powertrains with Haldex couplings in AUDI, VOLKSWAGEN, SEAT, SKODA, OPEL, LANDROVER and VOLVO vehicles.
RAVENOL AWD-H FLUID should be changed every 60.000 km in order to avoid damage to the powertrain.
Characteristics
RAVENOL AWD-H FLUID offers:
- an excellent flow behaviour at low temperatures
- High, stable viscosity index
- Very good oxidation stability
- Reliable protection against wear, corrosion and foaming
- Excellent coefficient of friction constancy
- High thermal and oxidative stability
- Excellent cooling ability
- Improved shear stability
Property | Unit | Data | Audit |
---|---|---|---|
Density at 20°C | kg/m³ | 855,0 | EN ISO 12185 |
Colour | hellgelb | visual | |
Colour number | 1,0 | DIN ISO 2049 | |
Viscosity at 100°C | mm²/s | 5,4 | DIN 51562-1 |
Viscosity at 40°C | mm²/s | 24,5 | DIN 51562-1 |
Viscosity index VI | 166 | DIN ISO 2909 | |
Brookfield Viskosität bei -40°C | mPa*s | 6060 | ASTM D5481 |
Pourpoint | °C | -63 | DIN ISO 3016 |
Flash point | °C | 192 | DIN EN ISO 2592 |
VKA Vier Kugel Test (Verschleiß) | mm | 0,58 | DIN 51350-3 |
VKA Vier Kugel-Test (Hochdruck) | N | 2000 / 2200 | DIN 51350-2 |
KRL 20hr KV 100°C | mm²/s | 5,36 | DIN 51350-6 |
Scherstabilität,KRL, Viskositätsverlust | % | 1,1 | |
Foaming behavior SEQ I | ml | 0/0 | ASTM D892 |
Foaming Behavior SEQ II | ml | 0/0 | ASTM D892 |
Foaming behavior SEQ III | ml | 0/0 | ASTM D892 |
Cu-Korrosion bei 150°C | 1a | ASTM D130 |