RAVENOL VGO SAE 70W-80 LS

RAVENOL VGO SAE 70W-80 LS 1 L
RAVENOL VGO SAE 70W-80 LS 4 L
RAVENOL VGO SAE 70W-80 LS 10 L
RAVENOL VGO SAE 70W-80 LS 20 L
RAVENOL VGO SAE 70W-80 LS 20 L
RAVENOL VGO SAE 70W-80 LS 60 L
RAVENOL VGO SAE 70W-80 LS 60 L
RAVENOL VGO SAE 70W-80 LS 208 L
RAVENOL VGO SAE 70W-80 LS 208 L
RAVENOL VGO SAE 70W-80 LS 1000 L
Category: Gear oil for manual transmissions and drive axis
Item number: 1221126
Viscosity: 70W-80
Specification: API GL-5 + LS, API MT-1, MIL-L-2105 D
Oil type: Full synthetic
Recommendation: BMW 83222447362, BMW Hypoid Axle Oil G4

RAVENOL VGO SAE 70W-80 LS is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.

RAVENOL VGO SAE 70W-80 LS is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles with self-locking differentials.

RAVENOL VGO SAE 70W-80 LS ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.

Application Note

RAVENOL VGO SAE 70W-80 LS is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing with limited-slip differential (LSD) of the BMW M-series since 2018 (transmissions 33 10 8 742 753, 33 10 8 686 663, 33 10 8 686 989, 33 10 8 480 981, 33 10 8 747 240, 33 10 8 875 640 and 33 10 8 046 243).

Use RAVENOL VGO SAE 70W-80 LS according to the manufacturer's instructions!

Characteristics

  • Outstanding cold flow properties
  • Good wear protection protects the gearbox
  • Excellent resistance to aging
  • Extremely low pour point
  • High viscosity stability
  • Reduces running noise

Technical Product Data

PropertyUnitDataAudit
Density at 20 °C849EN ISO 12185
ColourgelbbraunVISUELL
Viscosity at 100 °Cmm²/s9,2DIN 51562-1
Viscosity at 40 °Cmm²/s48,27DIN 51562-1
Viscosity Index VI176DIN ISO 2909
Brookfield Viscosity at -55 °CmPa*s12800ASTM D2983
Pourpoint°Celsius-63DIN ISO 3016
Flashpoint°Celsius198DIN EN ISO 2592
Foaming tendency (Seq. I, II, III).DIN EN 60243-1 (20°C)
Seq. I at 24 °C0/0ASTM D892
Seq. II at 93,5 °C10/0ASTM D892
Seq. III at 24 °C after 93,5 °C0/0ASTM D892
Copper Corrosion (24h/120 °C)1aASTM D130

All indicated data are approximate values and are subject to the commercial fluctuations.

Download PDF