RAVENOL Frostlube F 32

Category Other hydraulic oil

Item number 1323352

Recommendation Liebherr-Kräne

Application Industry

RAVENOL Frostlube F 32 is designed on the basis of specially selected base oils for the low-temperature performance and high quality hydraulic additives including corrosion and oxidation inhibitors as well as additives for the reduction of wear and foaming.

RAVENOL Frostlube F 32 is a high quality, anti-wear hydraulic oil with a very high viscosity index, good shear stability and excellent low-temperature properties.

Application Note

RAVENOL Frostlube F 32 is excellently suitable for application in extremely low temperatures down to -40 ° C, e.g. equipment in refrigerated warehouses or mobile facilities, which are used outdoors under extreme winter conditions. Also used in construction, forestry machinery and agricultural vehicles.

RAVENOL Frostlube F 32 is specifically formulated so that a consistent viscosity is extensively given even in the case of extremely varying temperatures.

RAVENOL Frostlube F 32 is a shear stable, high quality hydraulic oil and therefore, suitable for application under extreme hydraulic conditions without risk for the system. If the oil temperature is permanently above 70°C, the hydraulic system should be pressurised to minimise oil loss due to evaporation.


  • An extremely high viscosity index so that the good lubrication properties and the protection in the event of minimal viscosity alterations are ensured by a wide temperature range.
  • A low pour point; therefore, application at extremely low temperatures is permitted without the risk of freezing.
  • An extremely good resistance to oxidation and a very good shear stability; therefore, longer service life of the oil under the usually extreme application conditions.
  • Protection of the hydraulic system against corrosive influences.
  • Anti-wear effect.
  • Load bearing capability.
  • Longer service life of the oil.

Technical Product Data

Density at 20 °C 877,0 kg/m³ EN ISO 12185
Colour klar VISUELL
Viscosity at 100 °C 9,9 mm²/s DIN 51562-1
Viscosity at 40 °C 33,8 mm²/s DIN 51562-1
Viscosity Index VI 300 DIN ISO 2909
Pourpoint -60 °C DIN ISO 3016
Flashpoint 98 °C DIN EN ISO 2592