RAVENOL Erodieroel EDM2 Fluid

CategoryIndustrial oil

Item number1334011

Oil type Mineral

Recommendation Agema Swiss, Ebbco, Ewag, Exeron, GF Agie Charmilles, Kenfilt, Makino, Mitsubishi Electric, ONA, OPS Ingersoll, Sodick, Vollmer, Walter, Wendt

Application Industry

RAVENOL EDM 2 Fluid is a speciality dialectic fluid for use in all eroding machines (erosive stripping), particularly for roughing methods, in finishing and super-finishing.

RAVENOL EDM 2 Fluid is an ultra-pure fluid developed for maximum machine productivity and maximum comfort for operators of eroding machines in spark eroding. In this metal working process electric tension between the work piece to be machined and the electrode clamped into the machine is used to remove parts from the workpiece.

RAVENOL EDM 2 Fluid features consistent insulation until avalanche voltage is reached.

RAVENOL EDM 2 Fluid has the right balance of viscosity, volatility, oxidation stability, heat transfer properties, low odour development and low toxicity. 

RAVENOL EDM 2 Fluid is a highly refined, low-viscosity fluid particularly suitable for finishing where a high quality surface is required. It fulfils the function of insulator between the tool and workpiece, a spark conductor, coolant and a flushing oil in chip disposal. 

RAVENOL EDM 2 Fluid is also recommended for roughing methods requiring a high amount of metal to be removed, finishing and super-finishing..

Application Note

RAVENOL EDM 2 Fluid is excellent for spark eroding machines (erosive removal).

RAVENOL EDM 2 Fluid can also be used for roughing methods, finishing and super-finishing..


  • High flashing point
  • Excellent filterability
  • High wettability
  • Fair, pure and odourless
  • Low skin sensitisation with typical use
  • Greaseless, unlike more viscous fluids
  • Good cleaning power pertaining to small particles

Technical Product Data

Colour Code <0,5 DIN ISO 2049
Density at 20 °C 0,787 DIN 51751
Refractive index 1,4385 DIN 51423-2
Aniline point °Celsius 86,5 DIN ISO 2977-1
Aromatics uop mg/kg <50 UOP 495-75
Viscosity at 20 °C mm²/s 3,4 DIN 51562-1
Viscosity at 40 °C mm²/s 2,2 DIN 51562-1
Flashpoint (PM) °Celsius 103 DIN EN 22719
C-Numbers Prozent C13-C15 GC
Initial Boiling Point Prozent 233 DIN EN ISO 3405
Final Boiling Point Prozent 258 DIN EN ISO 3405
entspricht PH.EUR.

All indicated data are approximate values and are subject to the commercial fluctuations.

Download PDF