RAVENOL Agrar Synto SAE 5W-30 is a synthetic, fuel-saving “Low SAPS” agricultural engine oil based on the latest additive technology with very special base oils. It has been specially developed for agricultural diesel engines under the most severe operating conditions in all seasons. Excellent suitability for use in EURO 4, EURO 5, and EURO 6 engines in combination with low-sulfur diesel fuel.
RAVENOL Agrar Synto SAE 5W-30 is suitable for use in diesel engines with or without particle filters and catalytic converters. The SAE 5W cold-viscosity ensures a reliable cold start (low cold start wear) and the fastest possible supply to all lubrication points at very low outside temperatures. Extreme stresses are reliably controlled by the SAE 30 high-temperature viscosity. Minimizes friction and wear.
Application Note
RAVENOL Agrar Synto SAE 5W-30 is a low SAPS high-performance agricultural engine oil that can be used all year round and has been adapted to new exhaust emission guidelines. Can be used all year round for EURO IV, EURO V and EURO VI engines.
RAVENOL Agrar Synto SAE 5W-30 is suitable for extended oil change intervals in accordance with manufacturer specifications.
Characteristics
- Excellent detergent properties, no residue formation in the engine
- Excellent dispersing ability, that prevents cold sludge and residue formation
- Extends the service life of the particulate filter due to reduced tendency to particle build-up
- Low sulfate ash, phosphorus, and sulfur content “Low SAPS”
- Excellent wear protection
- Excellent oxidation stability
- Excellent high-temperature stability, high viscosity index
- Cost-effectiveness due to low fuel consumption
- Outstanding cold starting properties
- Excellent cold start performance even at low outside temperatures
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 849,0 | EN ISO 12185 |
| Colour | braun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 12,15 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 70,8 | DIN 51562-1 |
| Viscosity Index VI | 170 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 3,7 | ASTM D5481 |
| CCS Viscosity at -35 °C | mPa*s | 5530 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 22.500 | ASTM D4684 |
| Pourpoint | °C | -42 | DIN ISO 3016 |
| Noack Volatility | % M/M | 9,1 | ASTM D5800 |
| Flashpoint | °C | 228 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,8 | ASTM D2896 |
| Sulphated Ash | %wt. | 0,96 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.