RAVENOL HST SAE 5W-40 is an engine oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection, formulated with synthetic base oils.
RAVENOL HST SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL HST SAE 5W-40 contributes to protect the environment by reducing the emissions.
RAVENOL HST SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
RAVENOL HST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.
Suitable for extended oil change intervals where recommended by manufacturer.
RAVENOL HST SAE 5W-40 is suitable for the energy saving operation year-round of all modern cars with gasoline and diesel engines in passenger cars, vans, small transporters and similar vehicles and was specially developed for turbo chargers as well as the catalytic operation.
- High abrasion resistance
- Fuel saving because of easy running characteristics
- Excellent detergent and dispersant characteristics
- Prevention of black sludge creation
- Long endurance because of high oxidation stability
- Excellent cold start performance
- Very good viscosity temperature behaviour
- Low evaporation
- Suitable for catalysts
Technical Product Data
|Density at 20 °C||kg/m³||847,0||EN ISO 12185|
|Viscosity at 100 °C||mm²/s||13,9||DIN 51562-1|
|Viscosity at 40 °C||mm²/s||84,1||DIN 51562-1|
|Viscosity Index VI||171||DIN ISO 2909|
|HTHS Viscosity at 150 °C||mPa*s||3,65||ASTM D5481|
|CCS Viscosity at -30 °C||mPa*s||5480||ASTM D5293|
|Low Temp. Pumping viscosity (MRV) at -35 °C||mPa*s||25.000||ASTM D4684|
|Pourpoint||°C||-42||DIN ISO 3016|
|Noack Volatility||% M/M||7,4||ASTM D5800|
|Flashpoint||°C||240||DIN EN ISO 2592|
|tbn||mg KOH/g||10,0||ASTM D2896|
|Sulphated Ash||%wt.||1,08||DIN 51575|
All indicated data are approximate values and are subject to the commercial fluctuations.