- Certificate / Product Information -
RAVENOL BIO-Hydraulikoel HEES 32
Hydraulicfluid based on easily biogedradable ester.
RAVENOL BIO-Hydraulikoel HEES 32 is based on synthetic, easily biodegradable ester and a powerful, environmentally friendly combination of additives which gives the product excellent properties regarding oxidation stability, corrosion, low temperatures as well as EP behaviour.
Compared with products of vegetable triglyceride base, RAVENOL BIO-Hydraulikoel HEES 32 has much better high temperature oxidation stability.
RAVENOL BIO-Hydraulikoel HEES 32 is used wherever there is the danger of hydraulic fluid leaking into the ground or waste water. This includes all equipment operating in or near areas of water purification or water protection or near surface water, such as e.g. sewage treatment plants, dredging ships and floating dredges, lock hydraulics and river weirs, pipe and tunnel diving machines, - hydraulic aggregates in forests and on plains, earth moving machines in water collecting areas, forestry machines.
RAVENOL BIO-Hydraulikoel HEES 32 is tried and tested for aggregates specifying:
Rexroth Bosch Group: RE / RD 90221-01/02.10, SP Technical Research Institute, Sweden (Swedish Standard 15 54 34), fulfils the requirements of “Blauen Engel” (Environmetal friendly)
Practice and tested in aggregates with filling
VDMA 24532, ISO 15380
RAVENOL BIO-Hydraulikoel HEES 32 offers:
- Meets the requirements of the Federal Ministry for consumer protection, alimentation and agriculture regarding good biodegradability and technical specifications.
- On account of the used raw materials, RAVENOL BIO-Hydraulikoel HEES 32 is classified as water polluting class NWG (not water-polluting) – German classification.
Article number: 1321104
|Density at 20°C||kg/m³||908||EN ISO 12185|
|Viscosity at 100°C||mm²/s||7,25||DIN 51 562|
|Viscosity at 40°C||mm²/s||32,0||DIN 51 562|
|Viscosity index VI||248||ISO 2909|
|Pourpoint||°C||-30||DIN ISO 3016|
|Flash point (COC)||°C||260||DIN ISO 2592|
|Corrosive Action||1A||DIN EN ISO 2160|
|Foaming behavior SEQ I||ml||10/0||ISO 6247|
|Foaming Behavior SEQ II||ml||5/0||ISO 6247|
|Foaming behavior SEQ III||ml||5/0||ISO 6247|
|Air release property at 50°C max.||min.||1||ISO 9120|
|Part of renewable raw materials||%||80||ASTM D3266|
All indicated data are approximate values and are subject to the commercial fluctuations.
All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.22.05.2019
Ravensberger Schmierstoffvertrieb GmbH
Fax.: 052039719-40 / 41