- Certificate / Product Information -

RAVENOL DOT 4 LV

RAVENOL DOT 4 LV is a very high specification Brake and Clutch Fluid which conforms to and exceeds the latest ISO 4925 Class 6 standard.

The specific formulation of RAVENOL DOT 4 LV meets current international specifications US FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and ISO 4925 (Classes 3 & 4).

With its exceptional viscosity performance even at extremely Low Viskosity (max. 750 cSt @ -40°C) RAVENOL DOT 4 LV is especially recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 4 LV even at low temperatures.

RAVENOL DOT 4 LV mixes safely with other brake and clutch fluids that meet the above specifications.

Application Notes

RAVENOL DOT 4 LV brake fluid can be used in all vehicles where ISO 4925 Class 6 specification is required.

RAVENOL DOT 4 LV is recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

RAVENOL DOT 4 LV is also recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based fluid of this type is specified.

RAVENOL DOT 4 LV brake fluid is miscible with all known brake fluids of the same specification.

To use the high performance level of RAVENOL DOT 4 LV, a complete change of the brake fluid is recommended.

RAVENOL DOT 4 LV is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID !

KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS. Dispose of used brake fluid responsibly (EU waste code 160113)

Brake fluid damages paint work – if spilt wash off immediately with plenty of water.

Specifications

ISO 4925 Klasse 6, FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 und ISO 4925 (Klassen 3 und 4)

Practice and tested in aggregates with filling

Ford WSS-M6C65-A2, VW 501 14

Characteristic

RAVENOL DOT 4 LV offers:

  • Optimal ABS properties.
  • Chemical stability.
  • High lubricating power.
  • Neutral behavior towards brake parts.
  • Low viscosity at LVs.
  • Miscibility with all brake fluids of the same specification.
RAVENOL DOT 4 LV

Article number: 1350605
Packages:

1 L|1350605-001

Characteristics Unit Data Audit
Colour light yellow -
Density at 20°C kg/m³ 1052 EN ISO 12185
Boiling point °C 267 FMVSS 116
wet boiling point °C 172 FMVSS 116
Viscosity at -40°C mm²/s 675 ASTM D445
Viscosity at 100°C mm²/s 2,1 ASTM D445
pH- value 8,2 FMVSS 116
High temperature stability °C -1 FMVSS 116
Chemical Stability °C 1 FMVSS 116
Evaporation loss Gew% 61 FMVSS 116
Fluidity & Appearance at -40°C Pass, 4s FMVSS 116
Fluidity & Appearance at -50°C Pass,8s FMVSS 116
Water Tolerance at -40°C clear, 3s FMVSS 116
Water Tolerance at +60°C Clear, No sediment FMVSS 116
Compatibility at -40°C Clear, No stratification FMVSS 116
Compatibility at +60°C Clear, No sediment FMVSS 116
Water Content % <0,2 Karl Fischer
Corrosion Resistance -
Tinned Iron mg/cm² -0,03 FMVSS 116
_ Appearance good -
Steel mg/cm² -0.01 FMVSS 116
_ Appearance good -
Aluminium mg/cm² 0 FMVSS 116
_ Appearance good -
Cast Iron mg/cm² -0,03 FMVSS 116
_ Appearance good -
Brass mg/cm² -0,08 DIN 51757
_ Appearance good -
Copper mg/cm² -0,05 -
_ Appearance good -
Zinc mg/cm² 0,01 FMVSS 116
_ Appearance good -
Fluid Appearance i.O. FMVSS 116
Sediment % <0,05 FMVSS 116
pH- value 8,2 FMVSS 116
Rubber Diameter Change _ 0,16 FMVSS 116
Hardness Change _ -4 FMVSS 116
Appearance _ i.O. FMVSS 116
Oxidation Resistance _ -
Tinned Iron mg/cm² 0,04 FMVSS 116
_ Appearance good -
Aluminium mg/cm² 0,02 FMVSS 116
_ Appearance good -
Effect on Rubber _ -
SBR at 70°C Ø change, mm 0,56 FMVSS 116
__ hardness, IRHD -3 FMVSS 116
___ volume, % 6,21 FMVSS 116
_ Appearance gut FMVSS 116
SBR at 120°C Ø change, mm 0,73 FMVSS 116
__ hardness, IRHD -7 FMVSS 116
___ volume, % 6,21 FMVSS 116
_ Appearance good FMVSS 116
EPDM at 70°C (as required by SAE J1703) hardness, IRHD -2 FMVSS 116
___ volume, % 1,39 DIN 51757
_ Appearance gut -
EPDM at 120°C hardness, IRHD -2 FMVSS 116
___ volume, % 1,91 FMVSS 116
_ Appearance good FMVSS 116
Natural at 70°C (as required by ISO 4925) Ø change, mm 0,38 FMVSS 116
__ hardness, IRHD -5 FMVSS 116
___ volume, % 4,61 FMVSS 116
_ Appearance good FMVSS 116
Density at 20°C kg/m³ DIN 51757

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.

26.08.2019

Brake fluid

Specifications

Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41

We use cookies to personalize content and ads, to provide social media features, and to analyze traffic to our site. We also share information about your use of our website with our social media, advertising and analytics partners. Our Affiliates may aggregate this information with other information that you have provided to them or that you have collected as part of your use of the Services. For more information about cookies, please visit our Data protection





Agreed