- Certificate / Product Information -
RAVENOL FLJ SAE 5W-30
RAVENOL FLJ SAE 5W-30 is a synthetic, low SAPS, low-viscosity motor oil with CleanSynto® technology that is suitable for petrol and diesel cars, with or without turbochargers and fuel injectors. It minimises friction, deterioration and fuel consumption, as well as possessing excellent cold-start characteristics and a lengthened oil change interval, according to the manufacturer’s specifications.
RAVENOL FLJ SAE 5W-30 is based on additives with low ash content which are designed for use in modern diesel and petrol engines, with excellent cold-start characteristics, low oil-consumption and reduced pollutant emissions. The product extends the service life of DPFs and TWCs. HTHS >2.9mPa.s. It has been developed with fuel economy in mind in EURO IV and EURO V Standard engines with normal and extended oil change intervals (up to 50,000km or 2 years feasible).
RAVENOL FLJ SAE 5W-30 boasts a high viscosity index thanks to its formulation with special base oils. The excellent cold-start performance ensures optimum lubrication reliability in the cold run phase.
RAVENOL FLJ SAE 5W-30 is a universal, fuel-saving, specially-composed motor oil for modern petrol and diesel engines both with and without turbochargers, for use in automobiles and vans with extended oil change intervals. It extends the service life of particle filters. Due to its special formulation, RAVENOL FLJ SAE 5W-30 is ideally suited for use in accordance with the indicated OEM specifications.
Jaguar Land Rover STJLR.03.5005
Practice and tested in aggregates with filling
FORD WSS-M2C934-B, MAZDA, Mitsubishi
RAVENOL FLJ SAE 5W-30 offers:
- Fuel saving in partial and full load operation
- Low SAPS = reduced Sulphated ash, Phosphorous and Sulfur
- Excellent wear protection and a high viscosity index ensure the long service life of the engine even under high speed driving conditions.
- Excellent cold start properties even at low temperatures of below -35°C.
- A reliable lubrication film even at high operating temperatures.
- Low volatility, resulting in low oil consumption.
- No oil-related deposits in combustion chambers, in the piston ring zone and on valves.
- Compatible with sealing materials.
- Extended oil change intervals protect natural resources.
Article number: 1111143
|Density at 20°C||g/cm³||844||EN ISO 12185|
|Viscosity at 100°C||mm²/s||10,0||DIN 51 562|
|Viscosity at 40°C||mm²/s||54,36||DIN 51 562|
|Viscosity index VI||175||DIN ISO 2909|
|HTHS at 150°C||mPа*s||3,1||-|
|CCS Viscosity at -30°C||mPa*s||3848||ASTM D5293|
|Low Temp. Pumping viscosity (MRV) at -35°C||mPa*s||12.215||ASTM D4684|
|Pourpoint||°C||-36||DIN ISO 3016|
|Noack Volatility||% M/M||9,8||ASTM D5800/b|
|Flash Point PM||°C||236||DIN ISO 2592|
|TBN||mg KOH/g||6,0||ASTM D2896|
|Sulphated ash||%wt.||0,58||DIN 51 575|
All indicated data are approximate values and are subject to the commercial fluctuations.
All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.25.04.2019
Ravensberger Schmierstoffvertrieb GmbH
Fax.: 052039719-40 / 41