- Certificate / Product Information -


RAVENOL LLO SAE 10W-40 is a semi-synthetic high-performance light-running engine oil with CleanSynto® technology for passenger car carburetor and diesel engines with and without turbocharging and direct injection. Minimizing friction, wear and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to the manufacturer 's instructions.

RAVENOL LLO SAE 10W-40 is produced on the basis of hydro crack oils which correspond to the high tech demands.

Application Notes

RAVENOL LLO SAE 10W-40 is suitable for the use of all modern cars with Otto and Diesel engines all the year; no sludge in the motor, excellent results during the test run. A high engine cleanness is guaranteed also in case of turbo charging and a complete catalyst operation as well as multi valves and diesel direct injections.

Quality Classifications




MB-Approval 229.1

Practice and tested in aggregates with filling

VW 500 00 / 505 00, BMW Special Oil


RAVENOL Leichtlauföl LLO 10W-40 offers:

  • High abrasion resistance
  • Fuel saving because of easy running characteristics
  • Excellent detergent and dispersant characteristics
  • Prevention of black sludge creation
  • Long endurance because of high oxidation stability
  • An excellent cold start performance
  • A very good viscosity temperature behaviour
  • Low evaporation
  • Suitable for catalysts

Article number: 1112112

1 L|1112112-001

4 L|1112112-004

5 L|1112112-005

10 L|1112112-010

20 L|1112112-020

60 L|1112112-060

208 L|1112112-208

1000 L|1112112-700

Characteristics Unit Data Audit
Density at 20°C kg/m³ 862 EN ISO 12185
Colour yellow brown visual
Viscosity at 100°C mm²/s 14,6 DIN 51 562
Viscosity at 40°C mm²/s 96,4 DIN 51 562
Viscosity index VI 157 DIN ISO 2909
HTHS at 150°C mPа*s 4,51 ASTM D5481
CCS Viscosity at -25°C mPa*s 4890 ASTM D5293
Low Temp. Pumping viscosity (MRV) at -30°C mPa*s 25410 ASTM D4684
Pourpoint °C -36 DIN ISO 3016
Noack Volatility % M/M 9,1 ASTM D5800
Flash point (COC) °C 234 DIN ISO 2592
TBN mg KOH/g 8,9 ASTM D2896
Sulphated ash %wt. 1,3 DIN 51 575

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.


SAE/ Viscosity




Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41

We use cookies to personalize content and ads, to provide social media features, and to analyze traffic to our site. We also share information about your use of our website with our social media, advertising and analytics partners. Our Affiliates may aggregate this information with other information that you have provided to them or that you have collected as part of your use of the Services. For more information about cookies, please visit our Data protection