- Certificate / Product Information -


RAVENOL VDL SAE 5W-40 is a fully synthetic, low-friction engine oil with CleanSynto® Technology for passenger car diesel engines with or without turbo-charging and direct injection.

RAVENOL VDL SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL VDL SAE 5W-40 contributes to protect the environment by reducing the emissions.

RAVENOL VDL SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Notes

RAVENOL VDL SAE 5W-40 is ideally suited for energy-saving year-round use in passenger car diesel engines with turbocharger and catalytic converter operation.

RAVENOL VDL SAE 5W-40 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.



Practice and tested in aggregates with filling

VW 505 00, BMW Longlife-98, MB 229.3, Opel GM-LL-B-025, TOYOTA Common Rail, Mitsubishi, NISSAN, Fiat 9.55535-M2


RAVENOL VDL SAE 5W-40 offers:

  • High abrasion resistance
  • Fuel economy by low friction property
  • Excellent detergent and dispersant property
  • Prevention of black sludge formation
  • Extended endurance because of oxidation stability
  • Excellent cold start characteristics
  • Excellent viscosity-temperature- characteristics
  • Low evaporation tendency
  • Suitable for catalysts

Article number: 1111132

1 L|1111132-001

4 L|1111132-004

5 L|1111132-005

10 L|1111132-010

20 L|1111132-020

60 L|1111132-060

208 L|1111132-208

1000 L|1111132-700

Characteristics Unit Data Audit
Density at 20°C kg/m³ 852,0 EN ISO 12185
Colour braun visual
Viscosity at 100°C mm²/s 14,4 DIN 51 562
Viscosity at 40°C mm²/s 87,7 DIN 51 562
Viscosity index VI 170 DIN ISO 2909
HTHS at 150°C mPа*s 4,1 ASTM D5481
CCS Viscosity at -30°C mPa*s 6110 ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35°C mPa*s 25.000 ASTM D4684
Pourpoint °C -45 DIN ISO 3016
Noack Volatility % M/M 9 ASTM D5800/b
Flash point (COC) °C 240 DIN ISO 2592
TBN mg KOH/g 9,5 ASTM D2896
Sulphated ash %wt. 1,3 DIN 51 575

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.


Motor oils for passenger cars CleanSynto®

SAE/ Viscosity



Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41

We use cookies to personalize content and ads, to provide social media features, and to analyze traffic to our site. We also share information about your use of our website with our social media, advertising and analytics partners. Our Affiliates may aggregate this information with other information that you have provided to them or that you have collected as part of your use of the Services. For more information about cookies, please visit our Data protection