RAVENOL Group: Ravensberger Schmierstoffvertrieb GmbH since 1946 and Deutsche Ölwerke Lubmin GmbH since 2013
RAVENOL Group: Ravensberger Schmierstoffvertrieb GmbH since 1946 and Deutsche Ölwerke Lubmin GmbH since 2013

RAVENOL DOT 5.1

Category: Brake fluid
Item number: 1350602

RAVENOL DOT 5.1 brake fluid is suitable for use in all vehicles with ABS properties. The fluid is chemically stable and contains additives that provide the highest lubricating power.

The specific formulation of RAVENOL DOT 5.1 offers international DOT 5.1 specifications SAE J 1704, ISO 4925 and fulfills FMVSS 116 DOT 5.1.

RAVENOL DOT 5.1 fluid is an ideal brake fluid for modern vehicles with the brake circuit accompanying systems such as ESP and ABS due to its low viscosity. The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 5.1 even at low temperatures.

Application Note

RAVENOL DOT 5.1 brake fluid can be used in all vehicles where DOT 5.1 specification is required. It is suitable for all hydraulic brake systems with synthetic fluid.

RAVENOL DOT 5.1 brake fluid is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT 5.1, a complete change of the brake fluid is recommended.

RAVENOL DOT 5.1 is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • Optimal ABS properties
  • Chemical stability
  • High lubricating power
  • Neutral behavior towards brake parts
  • Low viscosity at low temperatures
  • Miscibility with all brake fluids of the same specification.

Technical Product Data

PropertyUnitDataAudit
ColourhellgelbVISUELL
Sediment %<0,05FMVSS 116
AluminiumΔ mg/cm²-0,01FMVSS 116
SBR at 120 °CØ Δ, mm+0,72FMVSS 116
SBR at 70 °CØ Δ, mm+0,44FMVSS 116
Boiling point°C269FMVSS 116
SteelΔ mg/cm²-0.004FMVSS 116
Hardness Change °IRHD-6FMVSS 116
Rubber Diameter Change +0,03FMVSS 116
Evaporation%w/w68FMVSS 116
Tinned IronΔ mg/cm²-0,01FMVSS 116
Viscosity at 100 °CmPa*s2,16ASTM D445
Viscosity at -40 °CcSt810ASTM D445
Water Tolerance at +60 °Cklar, keine AblagerungenFMVSS 116
Water Tolerance at -40 °Cklar, 2sFMVSS 116
Water contentmg/kg0,10DIN 51777-1
ZincΔ mg/cm²+0,03FMVSS 116
Chemical Stability°C+1,5FMVSS 116
Density at 20 °Ckg/m³1069,0EN ISO 12185
EPDM at 120 °CΔ Härte-3FMVSS 116
EPDM at 70 °C (as required by SAE J1703)Δ Härte-2FMVSS 116
Appearancei.O.FMVSS 116
Fluidity & Appearance at -40 °Ci.O., 2sFMVSS 116
Fluidity & Appearance at -50 °Ci.O., 4sFMVSS 116
Cast IronΔ mg/cm²-0,01FMVSS 116
High Temperature Stability°C0FMVSS 116
CopperΔ mg/cm²-0,03FMVSS 116
BrassΔ mg/cm²-0,05FMVSS 116
Compatibility at +60 °Cklar, keine AblagerungenFMVSS 116
Compatibility at -40 °Cklar, keine PhasentrennungFMVSS 116
Wet Equilibrium Reflux Boiling Point°C187FMVSS 116
Natural at 70 °C (as required by ISO 4925)Ø Δ, mm+0,42FMVSS 116
pH - value7,33FMVSS 116

All indicated data are approximate values and are subject to the commercial fluctuations.

Download PDF
This website already uses the necessary cookies, which are necessary for the correct operation of the program.