RAVENOL TTC Concentrate Protect C11
- 1,5 L | 1410100-150
- 5 L | 1410100-005
- 10 L | 1410100-010
- 20 L | 1410100-020
- 20 L | 1410100-B20
- 60 L | 1410100-060
- 60 L | 1410100-D60
- 1000 L | 1410100-700
- Frost protection and winter chemistry
- VW TL 774-C (entspricht G11)
- MAN 324NF
- AFNOR R15-601 (Frankreich)
- BS 6580 (GB)
- CUNA NC 956-16 (Italien)
- JIS K 2234 (Japan)
- O Norm V 5123 (Österreich)
- UNE 25-361 (Spanien)
- ASTM D1384
- ASTM D 2570
- ASTM D2809
- ASTM D3306 Type 1
- ASTM D4985
- ASTM D6210 Typ I-FF
- SAE J1034
- Chrysler MS-7170
- FIAT 9.55523
- FIAT PARAFLU 11
- Ford WSS-M97B51-A
- IVECO 18-1830
RAVENOL TTC Concentrate Protect C11 is an eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant for cooling circuits in combustion engines which provides maintenance-free corrosion and frost protection. The product is formulated as a long-term coolant based on a proven inhibitor development.
It is no longer just the anti-freeze effect (which automatically exists in an ethylene-glycol based product) which is critical for the quality of a coolant, but also the rust protection.
Therefore automakers subject coolants to long corrosion and cavitation tests.
RAVENOL TTC Concentrate Protect C11 protects the cooling system from corrosion, frost, and in the summer from overheating.
RAVENOL TTC Concentrate Protect C11 with frost and rust protection. Use according to the mixing chart. Follow manufacturer’s recommendations.
Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions:Clean cooling system, check for leaks, flush.
Mix RAVENOL TTC Concentrate Protect C11 with fresh water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.
|Antifreeze protection until||Parts Antifreeze||Parts Water|
RAVENOL TTC Concentrate Protect C11offers:
- Excellent for light metal engines
- Good reserve alkalinity
- High-quality corrosion additives for optimal corrosion protection
- Elastomer compatible with elastomers used in automotive radiators
|Density at 20°C||kg/m³||1130,0||EN ISO 12185|
|Flash point||°C||112||DIN 51 758|
|Boiling point||°C||155||ASTM D 1120|
|pH-value (50 %, 20°C)||8,4||ASTM D 1287|
|Reserve alkalinity||ml 0,1 n HCL||>20||ASTM D 1121|
|Water content||Gew.-%||<5||ASTM D 1123|
|Freezing point (50 %-Lösung)||°C||-37||ASTM D 1177|