RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2

RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 1 Kg- 1340125-001
ART.-NR. 1340125-001
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 5 Kg- 1340125-005
ART.-NR. 1340125-005
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 10 Kg- 1340125-010
ART.-NR. 1340125-010
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 15 Kg- 1340125-015
ART.-NR. 1340125-015
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 25 Kg- 1340125-025
ART.-NR. 1340125-025
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 100 g- 1340125-100
ART.-NR. 1340125-100
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 180 Kg- 1340125-180
ART.-NR. 1340125-180
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 200 g- 1340125-200
ART.-NR. 1340125-200
RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 400 g- 1340125-400
ART.-NR. 1340125-400
  • 1 Kg | 1340125-001
  • 5 Kg | 1340125-005
  • 10 Kg | 1340125-010
  • 15 Kg | 1340125-015
  • 25 Kg | 1340125-025
  • 100 g | 1340125-100
  • 180 Kg | 1340125-180
  • 200 g | 1340125-200
  • 400 g | 1340125-400
Specifications
DIN 51 502: KPFE2K-60
ISO 6743 Part 9: ISO-L-XECEB2
Categories
Greases

RAVENOL Arctic Tripoid grease ATG 2 mit MoS2 is manufactured from high quality mineral oils, synthetic native esters, poly alpha olefines and additional molybdenum disulfide MoS2 using thickening agents on a lithium soap base. Friction is reduced and the lubrication effect is improved through the addition of MoS2. This is required for the high mechanical loads during lubrication.

RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 shows high shear stability is oxidation and water resistant and has excellent corrosion and wear protection properties. The selected additives, MoS2 and a special ester formulation help reduce wear even during heavy, continuous operation and significantly prolong service life.

Application Notes

RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 is used with roller and friction bearings and heavy-duty bearings under extreme pressure at very low temperatures. Use for lubricating bearings on aggregates and machines in cold stores. RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 especially recommended for the lubrication of constant velocity universal joints (except needle bearing) at very low temperatures.

Also suitable for valve shafts in mineral oil pipes in Arctic conditions. Applications include motor vehicles, construction machinery, agricultural machinery and industrial machinery of all kinds. It is particularly suitable for devices that operate at low and high temperatures.

The upper operating temperature for RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 in continuous operation is 120°C. A maximum threshold of 160°C should not be exceeded.

Excessively high temperatures lead to a shortened service life. Regular lubrication improves materials and saves costs.

Characteristics

 

RAVENOL Arctic Tripoid Grease ATG 2 mit MoS2 offers:

  • Walk stability
  • Resistance to oxidation
  • Water resistance
  • Good corrosion protection characteristics
  • Extreme thermal load capacity
  • Very high pressure susceptibility
  • Good adhesion

 
PropertyUnitDataAudit
Colourschwarzvisual
ThickenerLithium-Komplexseifen-
AdditivesMolybdändisulfid-
NLGI-Class2DIN 51 818
DIN-Product-ClassificationKPFE2K-60DIN 51 502
ISO-Product-ClassificationISO-L-XECEB2ISO 6743 P.9
Working Temperature°C-60 / +120DIN 51 825
Short Term up to°C160-
Worked Penetration 60 strokesmm/10 bei 25°C265-295ISO 2137
Corrosion (SKF Emcor dist. Water)Corr. Degree0DIN 51 802
Dropping Point°C>180DIN ISO 2176
Copper Corrosion (24h/120°C)1DIN 51 811
Water Resistance (3h/90°C)°C1-90DIN 51 807 T.1
VKA Pressure Carrying CapacityN3200DIN 51 350 T.4
VKA Wearing Characteristics (four-ball-tester)mm0,56DIN 51 350 T.5
Kinematic Viscosity (Base Oil)mm²/s bei 40°C140DIN 51562-1
kinematic viscosity at 100°Cmm²/s20DIN 51 562 T.1
Newsletter