DE
EN
RAVENOL RHP Racing High Performance Gear SAE 75W-90 is a modern, PAO (poly-alpha-olefin) based full synthetic racing gear oil with USVO® Technology.
RAVENOL RHP Racing High Performance Gear SAE 75W-90 was developed as manual and differential oil for use in racing vehicles.
RAVENOL RHP Racing High Performance Gear SAE 75W-90 is particularly recommended for use in manual transmissions and rear axle with integrated locking differential. The USVO® technology offers high performance, improved gear protection and optimized gear cleanliness for your vehicle. Special additives guarantee limited slip properties, a high load carrying capacity, stable viscosity, optimum wear protection, low foaming, proper lubrication and reducing the heating of the transmission.
RAVENOL RHP Racing High Performance Gear SAE 75W-90 offers excellent anti-wear properties and an optimum viscosity-temperature behavior.
Application Note
RAVENOL RHP Racing High Performance Gear SAE 75W-90 is a full synthetic racing gear oil for use in racing cars and is particularly recommended for use in manual transmissions and rear axle with integrated locking differential.
Characteristics
- A high-pressure stable lubricating film even at high oil temperatures and under high loads.
- Outstanding shear stability and excellent thermal stability.
- Very good viscosity-temperature behavior.
- Excellent ageing resistance and high oxidation resistance.
- Very good wear protection, excellent EP properties.
- Low foaming tendency even at high speeds.
- Good compatibility with non-ferrous metals and sealing materials.
- Good shifting behavior even at low temperatures, low pour point.
- Reduced gear noise due to minimized vibrations, even with hot oil due to the well adhering lubricating film.
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Colour | gelb | VISUELL | |
| Seq. I at 24 °C | ml/ml | 0/0 | ASTM D892 |
| Seq. II at 93,5 °C | ml/ml | 10/0 | ASTM D892 |
| Seq. III at 24 °C after 93,5 °C | ml/ml | 0/0 | ASTM D892 |
| Viscosity at 100 °C | mm²/s | 16,1 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 92,6 | DIN 51562-1 |
| Viscosity Index VI | 188 | DIN ISO 2909 | |
| Brookfield Viscosity at -40 °C | mPa*s | 33.800 | ASTM D2983 |
| Copper Strip Test at 121 °C | 1b | ASTM D130 | |
| Density at 20 °C | kg/m³ | 868,0 | EN ISO 12185 |
| Flashpoint | °C | 200 | DIN EN ISO 2592 |
| Pourpoint | °C | -57 | DIN ISO 3016 |
All indicated data are approximate values and are subject to the commercial fluctuations.