DE
EN
RAVENOL Snowmobiles SAE 0W-40 is a PAO (Polyalphaolefin) based, fully synthetic engine oil, specially developed for the demanding use in modern 4-stroke snowmobile engines. Suitable for turbo-charged and naturally aspirated engines.
RAVENOL Snowmobiles SAE 0W-40 is based on high-quality base oils and an advanced additive package that is tailored to the special thermal and mechanical loads in winter operation.
RAVENOL Snowmobiles SAE 0W-40 guarantees maximum lubrication performance, even at lowest temperatures and high engine loads. The oil helps to protect the environment by significantly saving fuel and reducing emissions.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
Application Note
RAVENOL Snowmobiles SAE 0W-40 is used in 4-stroke snowmobile engines from leading manufacturers. It can also be used in vehicles with wet clutches and catalytic converters.
RAVENOL Snowmobiles SAE 0W-40 can be used in the following snowmobiles:
Arctic Cat: ZR models, Bearcat models, Pantera models, etc. (4-stroke)
Ski-Doo: Expedition models, Grand Touring models, GSX models, etc. (4-stroke)
Yamaha: Sidewinder models, etc. (4-stroke)
Lynx: Adventure models with 4-stroke engines
Also suitable for many other snowmobiles with similar engine systems.
Only use in accordance with the vehicle manufacturer's operating instructions!
Characteristics
- low-wear cold start even at extremely low outside temperatures
- developed for seasonal use and long service life
- stable lubrication and good shear stability
- ideal for use in extremely cold climate zones
- based on high-quality PAO (Polyalphaolefin)
- compatible with wet clutches and catalytic converters
- high corrosion- and wear protection
- low evaporation tendency, therefore low oil consumption
- tested and proven additives
- high safety reserves during peak loads
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 838,4 | EN ISO 12185 |
| Colour | gelbbraun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 15,01 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 86,14 | DIN 51562-1 |
| Viscosity Index VI | 184 | DIN ISO 2909 | |
| CCS Viscosity at -30 °C | mPa*s | 4581 | ASTM D5293 |
| Pourpoint | °C | -51 | DIN ISO 3016 |
| Noack Volatility | %m | 8,1 | ASTM D5800 |
| Flashpoint | °C | 238 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,54 | ASTM D2896 |
| Sulphated Ash | %wt. | 1,12 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.