DE
EN
RAVENOL TFE Truck Fuel Efficiency SAE 5W-20 is a synthetic high-performance diesel engine oil with CleanSynto® technology and reduced HTHS viscosity for the latest generation of MAN and Scania trucks. The modern additive package ensures excellent piston cleanliness and fewer deposits to shorten workshop times.
The innovative Low SAPS formulation of RAVENOL TFE Truck Fuel Efficiency SAE 5W-20 is particularly compatible with exhaust aftertreatment systems such as EGR-, SCR- and DPF- filters and extends their service life. It therefore contributes to compliance with vehicle emission limits and to improve fuel consumption.
Application Note
RAVENOL TFE Truck Fuel Efficiency SAE 5W-20 is recommended for use in the latest generation of MAN and Scania engines when an engine oil with reduced HTHS viscosity is required.
RAVENOL TFE Truck Fuel Efficiency SAE 5W-20 is used in all engines and transmissions that require oil with this specifications.
NOTE:
RAVENOL TFE Truck Fuel Efficiency SAE 5W-20 is not backwards compatible with older specifications. Only use if a product with the specifications MAN M 3977 or Scania LDF-5 is prescribed.
Observe the manufacturer's instructions!
Characteristics
- An excellent engine protection even after a cold start and under tougher conditions
- Guaranteed at low temperatures a fast lubrication of the motor and a sufficiently thick lubricant film to protect against wear
- Safety against sludge, carbon deposits, varnish and corrosion even under adverse operating conditions
- Guarantees maximum engine cleanliness
- Low SAPS
- Neutral towards sealing materials
- Very stable and excellent viscosity behaviour
- Excellent detergent and dispersant properties
- Very good wear and corrosion protection, high oxidation stability
- Enables high fuel savings
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 850,6 | EN ISO 12185 |
| Colour | braun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 8,2 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 46,54 | DIN 51562-1 |
| Viscosity Index VI | 151 | DIN ISO 2909 | |
| CCS Viscosity at -35 °C | mPa*s | 5710 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 13.500 | ASTM D4684 |
| Pourpoint | °C | -45 | DIN ISO 3016 |
| Noack Volatility | % M/M | 10,0 | ASTM D5800 |
| Flashpoint | °C | 230 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,1 | ASTM D2896 |
| Sulphated Ash | %wt. | 0,94 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.