RAVENOL Hydraulikoel HVLP-D 46
- 20 L | 1323365-020
- DIN 51 524 Teil 3
- Hydraulic Oils / Compressor Oils
- CETOP RP 91H-HV
- General Motors LH-04-1
- General Motors LH-06-1
- General Motors LH-15-1
- ISO 6743/4-HV
- DENISON HF-0
- DENISON HF-1
- DENISON HF-2
- Sperry Vickers M-2950-S
- Sperry Vickers 1-286-S
- AFNOR 48 603 HV
- US Steel 136
RAVENOL Hydraulikoel HVLP-D 46 is a detergent hydraulic oil with a high viscosity index for use in a wide temperature range (multi-range hydraulic oil).
RAVENOL Hydraulikoel HVLP-D 46 is designed with selected base oils with additives to prevent corrosion, wear and friction.
RAVENOL Hydraulikoel HVLP-D 46 is characterized by a good viscosity-temperature behavior, high aging resistance and reliable corrosion protection.
RAVENOL Hydraulikoel HVLP-D 46 also contains detergent and dispersing agents, which always provide for a clean hydraulic system.
These additives dissolve contaminants, hold them in suspension and enabling the cleaning of contaminated hydraulic systems. The functional elements of a hydraulic system thereby remain free of deposits and bonds. This will emulsified penetrating water and ensure trouble-free operation of the hydraulic system.
RAVENOL Hydraulikoel HVLP-D 46 is used in hydraulic systems which are exposed to very fluctuating operating temperatures, abrasion, dirt and water.
RAVENOL Hydraulikoel HVLP-D 46 is designed for heavily loaded hydraulic systems of agricultural, forestry and construction machinery and stationary hydraulic systems, e.g. Industrial equipment.
RAVENOL Hydraulikoel HVLP-D 46 offers:
- Reliable corrosion protection even when absorbing moisture
- Good air and water separation capacity, prevention of foam formation
- Excellent wear protection
- Good oxidation stability
- Excellent detergent and dispersing properties
- Neutral behavior against sealing materials
- Very low flow point
|Density at 20°C||kg/m³||858||EN ISO 12185|
|Viscosity at 40°C||mm²/s||46,1||DIN 51562|
|Viscosity at 100°C||mm²/s||8,5||DIN 51562|
|Viscosity index VI||163||DIN ISO 2909|
|Flash point (COC)||°C||230||DIN ISO 2592|
|Pourpoint||°C||-42||DIN ISO 3016|