RAVENOL DFE SAE 0W-20
- 1 L | 1111109-001
- 4 L | 1111109-004
- 5 L | 1111109-005
- 10 L | 1111109-010
- 20 L | 1111109-020
- 20 L | 1111109-B20
- 60 L | 1111109-060
- 60 L | 1111109-D60
- 208 L | 1111109-208
- 208 L | 1111109-D28
- 1000 L | 1111109-700
- API SN Plus
- API SP (RC)
- ILSAC GF-6A
- Fully synthetic
- GM dexos1™ Gen 2
- License: API SP Resource Conserving, API SN Plus; ILSAC GF-6A
- Motor oils for passenger cars USVO®
- Chrysler MS-6395
- Chrysler MS-13340
- Ford WSS-M2C947-A
- Ford WSS-M2C947-B1
RAVENOL DFE SAE 0W-20 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.
RAVENOL DFE SAE 0W-20 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency.
RAVENOL DFE SAE 0W-20 ensures the prevention of premature fuel ignition LSPI (Low Speed Pre-ignition), thus avoiding engine damage. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL DFE SAE 0W-20 helps to protect the environment by reducing emissions.
RAVENOL DFE SAE 0W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Extended oil change intervals according to the manufacturer 's instructions.
RAVENOL DFE SAE 0W-20 is suitable as a high-performance light-running engine oil for demanding engines. It is recommended for modern passenger car engines from OPEL, GENERAL MOTORS, Chevrolet, Daewoo and Holden according to Dexos1 specification under all operating conditions.
RAVENOL DFE SAE 0W-20 is also applicable to the specified specifications of Ford and Chrysler.
RAVENOL DFE SAE 0W-20 offers:
- Fuel savings in partial and full load operation
- LowSAPS = Low sulfate ash, phosphorus and sulfur
- Very stable and excellent viscosity behavior
- Excellent shear stability
- Very good cold start characteristics
- A safe lubrication film at very high operating temperatures
- Very good detergents and dispersing properties
- Very good wear and corrosion protection
- Protection from foam formation
- Excellent detergent and dispersant properties
- Long life due to high oxidation stability
- Catalyst suitability
|Density at 20°C||kg/m³||840,0||DIN 51757|
|Viscosity at 100°C||mm²/s||8,4||DIN 51 562|
|Viscosity at 40°C||mm²/s||45,9||DIN 51 562|
|Viscosity index VI||163||DIN ISO 2909|
|HTHS at 150°C||mPа*s||2,69||ASTM D5481|
|CCS Viscosity at -35°C||mPa*s||4150||ASTM D5293|
|Low Temp. Pumping viscosity (MRV) at -40°C||mPa*s||11.200||ASTM D 4684|
|Pourpoint||°C||-63||DIN ISO 3016|
|Noack Volatility||% M/M||7,6||ASTM D5800/b|
|Flash point||°C||238||DIN ISO 2592|
|TBN||mg KOH/g||9,0||ASTM D2896|
|Sulphated ash||%wt.||0,8||DIN 51 575|