- RAVENOL Motobike Engine Cleaner Shot
0.1 L | 1390402-100
Item number 1390402
RAVENOL Motobike Engine Cleaner Shot is a highly effective cleaning concentrate with lubricating components for the efficient cleaning of all motorcycle engines (with and without catalytic converter). In general, RAVENOL Motobike Engine Cleaner Shotcan be used in all motorcycles to clean the oil circuit to remove dirt, resin, residues, coking and sludge deposits. Cleaning-intensive surfactants effectively remove these contaminants when draining off the used oil, thus neutralizing harmful motor acids.
RAVENOL Motobike Engine Cleaner Shotthus ensures reduced fuel consumption, improved engine performance, less wear on the units and longe catalyst life.
RAVENOL Motobike Engine Cleaner Shotis suitable for motorcycles with and without wet clutch.
RAVENOL Motobike Engine Cleaner Shot is added to the warm engine oil. Application range:
Oil and lubrication circuit of 4-stroke motorcycle engines and gearboxes. For all engine oils based
on mineral and synthetic oils.
If black sludge is suspected, hydraulic tappet rattles, loss of compression in the area of the pistoring
Before changing the oil and if the oil change is delayed.
Before storing the motorcycle to protect the engine and transmission.
Application: Add the contents of the can to the warm engine oil before changing the oil. The minimum oil level must not be undercut. For optimal cleaning efficiency, leave it idling for max. 10 minutes. Then immediately change the oil and filter.
Dosage:100 ml RAVENOL Motobike Engine Cleaner Shot are sufficient for one application, regardless of manufacturer and motor size.
- Neutrality towards sealing materials
- Improve the performance of the engine by removing deposits
- Extend the life of the engine
- Cleaning the entire oil and lubrication circuit
- Neutralization and protection of the lubrication system against harmful motor acids
- Remedy for dirty engines
- Protection against loss of compression in the area of the piston rings
Technical Product Data
|Density at 20 °C||805,0||kg/m³||EN ISO 12185|