Category Passenger car motor oil

Item number 1111132

Viscosity 5W-40

Specification ACEA B3/B4, API CF

Oil type Fully synthetic

Recommendation BMW Longlife-98, Fiat 9.55535-M2, MB 229.3, Mitsubishi, Nissan, Opel GM-LL-B-025, Toyota Common Rail, VW 505 00

Application Passenger car

Technology Clean Synto®

RAVENOL VDL SAE 5W-40 is a fully synthetic, low-friction engine oil with CleanSynto® Technology for passenger car diesel engines with or without turbo-charging and direct injection.

RAVENOL VDL SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL VDL SAE 5W-40 contributes to protect the environment by reducing the emissions.

RAVENOL VDL SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL VDL SAE 5W-40 is ideally suited for energy-saving year-round use in passenger car diesel engines with turbocharger and catalytic converter operation.

RAVENOL VDL SAE 5W-40 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.


  • High abrasion resistance.
  • Fuel economy by low friction property.
  • Excellent detergent and dispersant property.
  • Prevention of black sludge formation.
  • Extended endurance because of oxidation stability.
  • Excellent cold start characteristics.
  • Excellent viscosity-temperature- characteristics.
  • Low evaporation tendency.
  • Suitable for catalysts.

Technical Product Data

Density at 20 °C 849,0 kg/m³ EN ISO 12185
Colour braun VISUELL
Viscosity at 100 °C 14,4 mm²/s DIN 51562-1
Viscosity at 40 °C 87,7 mm²/s DIN 51562-1
Viscosity Index VI 170 DIN ISO 2909
HTHS Viscosity at 150 °C 4,1 mPa*s ASTM D5481
CCS Viscosity at -30 °C 6110 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °C 25.000 mPa*s ASTM D4684
Pourpoint -45 °C DIN ISO 3016
Noack Volatility 9,0 % M/M ASTM D5800
Flashpoint 240 °C DIN EN ISO 2592
tbn 9,5 mg KOH/g ASTM D2896
Sulphated Ash 1,3 %wt. DIN 51575