- Certificate / Product Information -


RAVENOL HDX SAE 5W-30 is a synthetic, low-friction engine oil with CleanSynto® technology for car gasoline engines, with and without turbocharging and direct injection, such as Turbo-GDI and direct injection.

With its new formulation, RAVENOL HDX SAE 5W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking.

RAVENOL HDX SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL HDX SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL HDX SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL HDX SAE 5W-30 helps to avoid low speed pre-ignition LSPI (Low Speed ​​Pre-ignition). This can help avoid engine damage.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Notes

RAVENOL HDX SAE 5W-30 is a high-performance low-friction engine oil for modern engines, and is recommended by OPEL/GENERAL MOTORS to the latest GM dexos1 specification for modern GM gasoline-engined vehicles under all operating conditions.

RAVENOL HDX SAE 5W-30 is also suitable fort he shown specifications of Ford, Chrysler and Fiat.





GM dexos1™ Gen 2 (License No. D10709HK081), License: API SN Plus, API SN Resource Conserving, ILSAC GF-5

Practice and tested in aggregates with filling

Chrysler MS-6395, MS-13340; Fiat 9.55535-CR1; Ford WSS-M2C946-A/-B1, WSS-M2C929-A; Honda/Acura HTO-06


RAVENOL HDX SAE 5W-30 offers:

  • Fuel savings in partial and full load operation
  • Outstanding wear protection and high viscosity index ensure engine longevity, even under high-speed driving conditions.
  • Excellent cold-start properties even at low temperatures below -25°C.
  • A safe lubricating film at high operating temperatures.
  • Low evaporation tendency, thus low oil consumption.
  • No oil-based deposits in combustion chambers, in the piston ring zone and on valves.
  • Neutrality towards sealing materials.
  • Extended oil change intervals protect natural resources.

Article number: 1111125

1 L|1111125-001

4 L|1111125-004

5 L|1111125-005

10 L|1111125-010

20 L|1111125-020

60 L|1111125-060

208 L|1111125-208

Characteristics Unit Data Audit
Density at 20°C kg/m³ 844,0 EN ISO 12185
Colour yellow brown visual
Viscosity at 100°C mm²/s 10,8 DIN 51 562
Viscosity at 40°C mm²/s 59,8 DIN 51 562
Viscosity index VI 173 DIN ISO 2909
HTHS at 150°C mPа*s 3,4 ASTM D5481
CCS Viscosity at -30°C mPa*s 3630 ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35°C mPa*s 18.500 ASTM D 4684
Pourpoint °C -45 DIN ISO 3016
Noack Volatility % M/M 10,9 ASTM D5880
Flash point °C 228 DIN ISO 2592
TBN mg KOH/g 8,7 ASTM D2896
Sulphated ash %wt. 0,86 DIN 51 575

All indicated data are approximate values and are subject to the commercial fluctuations.

All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.


SAE/ Viscosity




Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41

We use cookies to personalize content and ads, to provide social media features, and to analyze traffic to our site. We also share information about your use of our website with our social media, advertising and analytics partners. Our Affiliates may aggregate this information with other information that you have provided to them or that you have collected as part of your use of the Services. For more information about cookies, please visit our Data protection